This patch adds support for device registration of various
smartreflex module present in the system. This patch introduces
the platform data for smartreflex devices which include
the efused and test n-target vaules, module enable/disable
pointers and a parameter to indicate whether smartreflex
autocompensation needs to be enabled on init or not.
Currently auocompensation is enabled on init by default
for OMAP3430 ES3.1 chip.
Signed-off-by: Thara Gopinath <thara@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/sr_device.c | 177 +++++++++++++++++++++++++++++++++++++++
2 files changed, 178 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-omap2/sr_device.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c97a1b5..42b0cc5 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -55,7 +55,7 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX) += smartreflex.o
+obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
new file mode 100644
index 0000000..b7e2d10
--- /dev/null
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -0,0 +1,177 @@
+/*
+ * OMAP3/OMAP4 smartreflex device file
+ *
+ * Author: Thara Gopinath <thara@xxxxxx>
+ *
+ * Based originally on code from smartreflex.c
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@xxxxxx>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <plat/omap_device.h>
+#include <plat/smartreflex.h>
+#include <plat/voltage.h>
+
+#include "control.h"
+
+static struct omap_device_pm_latency omap_sr_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
+ },
+};
+
+#ifdef OMAP_SMARTREFLEX_TESTING
+/*
+ * Hard coded nvalues for testing purposes for OMAP3430,
+ * may cause device to hang!
+ */
+static void __init sr_set_nvalues(struct omap_sr_dev_data *dev_data,
+ struct omap_sr_data *sr_data)
+{
+ int i;
+
+ if (!dev_data || !dev_data->volts_supported ||
+ !dev_data->volt_data || !dev_data->test_nvalues) {
+ pr_warning("%s: Bad parameters! dev_data = %x,"
+ "dev_data->volts_supported = %x,"
+ "dev_data->volt_data = %x,"
+ "dev_data->test_nvalues = %x\n", __func__,
+ (unsigned int)dev_data, dev_data->volts_supported,
+ (unsigned int)dev_data->volt_data,
+ (unsigned int)dev_data->test_nvalues);
+ return;
+ }
+
+ sr_data->senn_mod = dev_data->test_sennenable;
+ sr_data->senp_mod = dev_data->test_senpenable;
+ for (i = 0; i < dev_data->volts_supported; i++)
+ dev_data->volt_data[i].sr_nvalue = dev_data->test_nvalues[i];
+}
+#else
+/* Read EFUSE values from control registers for OMAP3430 */
+static void __init sr_set_nvalues(struct omap_sr_dev_data *dev_data,
+ struct omap_sr_data *sr_data)
+{
+ int i;
+
+ if (!dev_data || !dev_data->volts_supported || !dev_data->volt_data ||
+ !dev_data->efuse_nvalues_offs) {
+ pr_warning("%s: Bad parameters! dev_data = %x,"
+ "dev_data->volts_supported = %x,"
+ "dev_data->volt_data = %x,"
+ "dev_data->efuse_nvalues_offs = %x\n", __func__,
+ (unsigned int)dev_data, dev_data->volts_supported,
+ (unsigned int)dev_data->volt_data,
+ (unsigned int)dev_data->efuse_nvalues_offs);
+ return;
+ }
+
+ /*
+ * From OMAP3630 onwards there are no efuse registers for senn_mod
+ * and senp_mod. They have to be 0x1 by default.
+ */
+ if (!dev_data->efuse_sr_control) {
+ sr_data->senn_mod = 0x1;
+ sr_data->senp_mod = 0x1;
+ } else {
+ u32 v, shift;
+
+ v = omap_ctrl_readl(dev_data->efuse_sr_control);
+
+ shift = dev_data->sennenable_shift;
+ sr_data->senn_mod = (v & (0x3 << shift)) >> shift;
+
+ shift = dev_data->senpenable_shift;
+ sr_data->senp_mod = (v & (0x3 << shift)) >> shift;
+ }
+
+ for (i = 0; i < dev_data->volts_supported; i++) {
+ u32 v = omap_ctrl_readl(dev_data->efuse_nvalues_offs[i]);
+
+ dev_data->volt_data[i].sr_nvalue = v;
+ }
+}
+#endif
+
+static int sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+ struct omap_sr_data *sr_data;
+ struct omap_sr_dev_data *sr_dev_data;
+ struct omap_device *od;
+ char *name = "smartreflex";
+ static int i;
+
+ sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
+ if (!sr_data) {
+ pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
+ __func__, oh->name);
+ return -ENOMEM;
+ }
+
+ sr_dev_data = (struct omap_sr_dev_data *)oh->dev_attr;
+ if (unlikely(!sr_dev_data)) {
+ pr_err("%s: dev atrribute is NULL\n", __func__);
+ goto exit;
+ }
+
+ /*
+ * OMAP3430 ES3.1 chips by default come with Efuse burnt
+ * with parameters required for full functionality of
+ * smartreflex AVS feature like ntarget values , sennenable
+ * and senpenable. So enable the SR AVS feature during boot up
+ * itself if it is a OMAP3430 ES3.1 chip.
+ */
+ sr_data->enable_on_init = false;
+ if (cpu_is_omap343x())
+ if (omap_rev() == OMAP3430_REV_ES3_1)
+ sr_data->enable_on_init = true;
+
+ sr_data->voltdm = omap_voltage_domain_lookup(sr_dev_data->vdd_name);
+ if (IS_ERR(sr_data->voltdm)) {
+ pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
+ __func__, sr_dev_data->vdd_name);
+ goto exit;
+ }
+
+ sr_dev_data->volts_supported = omap_voltage_get_volttable(
+ sr_data->voltdm, &sr_dev_data->volt_data);
+ if (!sr_dev_data->volts_supported) {
+ pr_warning("%s: No Voltage table registerd fo VDD%d."
+ "Something really wrong\n\n", __func__, i + 1);
+ goto exit;
+ }
+
+ sr_set_nvalues(sr_dev_data, sr_data);
+
+ od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+ omap_sr_latency,
+ ARRAY_SIZE(omap_sr_latency), 0);
+ if (IS_ERR(od))
+ pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
+ __func__, name, oh->name);
+exit:
+ i++;
+ kfree(sr_data);
+ return 0;
+}
+
+static int __init omap_devinit_smartreflex(void)
+{
+ return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
+}
+device_initcall(omap_devinit_smartreflex);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
