2010/10/4 Premi, Sanjeev <premi@xxxxxx>: > >> -----Original Message----- >> From: linux-omap-owner@xxxxxxxxxxxxxxx >> [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Ming Lei >> Sent: Sunday, October 03, 2010 2:34 PM >> To: Kevin Hilman; linux-omap@xxxxxxxxxxxxxxx >> Subject: beagle hangs in uart3 disabling clocks >> >> Hi, >> >> I just tested pm branch of tony's linux-omap-2.6 tree, and found my >> beagle will hang in uart3 disabling clocks, follows the log info: >> >> > [snip]..[snip] > >> >> Texas Instruments X-Loader 1.41 >> Starting OS Bootloader... >> >> >> U-Boot 1.3.3 (Jul 10 2008 - 16:33:09) >> >> OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz >> OMAP3 Beagle Board + LPDDR/NAND >> DRAM: 128 MB >> NAND: > > Lei, > > Couldn't help noticing the version information for x-loader and > u-boot. Both seem to be quite old... > > Could you try update both? May be, there is a dependency... No difference even update x-load and u-boot with those in the link below: http://code.google.com/p/beagleboard/wiki/BeagleboardRevC3Validation thanks, -- Lei Ming -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
