Tony, > -----Original Message----- > From: Tony Lindgren [mailto:tony@xxxxxxxxxxx] > Sent: Friday, September 17, 2010 11:25 PM > To: Ghorai, Sukumar > Cc: linux-omap@xxxxxxxxxxxxxxx; linux-mtd@xxxxxxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; Vimal Singh > Subject: Re: [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode > support > > * Sukumar Ghorai <s-ghorai@xxxxxx> [100916 00:53]: > > This patch enable prefetch-irq mode for NAND. > > > > --- a/drivers/mtd/nand/omap2.c > > +++ b/drivers/mtd/nand/omap2.c > > @@ -467,6 +485,152 @@ static void omap_write_buf_dma_pref(struct > mtd_info *mtd, > > omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1); > > } > > > > +/* > > + * omap_nand_irq - GMPC irq handler > > + * @this_irq: gpmc irq number > > + * @dev: omap_nand_info structure pointer is passed here > > + */ > > +static irqreturn_t omap_nand_irq(int this_irq, void *dev) > > +{ > > + struct omap_nand_info *info = (struct omap_nand_info *) dev; > > + u32 bytes; > > + u32 irq_stat; > > + > > + irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS); > > + bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); > > + bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */ > > + if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */ > > + if (irq_stat & 0x2) > > + goto done; > > + > > + if (info->buf_len & (info->buf_len < bytes)) > > + bytes = info->buf_len; > > + else if (!info->buf_len) > > + bytes = 0; > > + iowrite32_rep(info->nand.IO_ADDR_W, > > + (u32 *)info->buf, bytes >> 2); > > + info->buf = info->buf + bytes; > > + info->buf_len -= bytes; > > + > > + } else { > > + ioread32_rep(info->nand.IO_ADDR_R, > > + (u32 *)info->buf, bytes >> 2); > > + info->buf = info->buf + bytes; > > + > > + if (irq_stat & 0x2) > > + goto done; > > + } > > + gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat); > > + irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS); > > + > > + return IRQ_HANDLED; > > + > > +done: > > + complete(&info->comp); > > + /* disable irq */ > > + gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0); > > + > > + /* clear status */ > > + gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat); > > + irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS); > > + > > + return IRQ_HANDLED; > > +} > > This handler should be in gpmc.c as it may be needed for other GPMC > connected devices on the same system. You can use chained irq handlers > to allow all the drivers to use the interrupt then. [Ghorai] You mean as this function used the gpmc-irq number in nand file, so handler should move to gpmc.c file? 1. For that we need to add one io-struct (to keep io buffer status) in gpmc.c; 2. Also need help how to sync between gpmc.c/omap_nand_irq() and omap2.c/omap_write_buf_irq_pref(), men how read/write function know that work done in interrupt-context? Or you prefer to move the complete IO function (omap_read/write_buf_irq_pref) to gpmc.c? 3. gpmc does not now about the read and write address that's applicable for NAND. So how to pass the IO address from omap2.c to gpmc.c, interrupt handler? So, please let me know your suggestion again such that I can post this time itself. Otherwise again it will miss from coming release, this was posted/reviewed for last release too. And suggest to void repeating of missing release window again. > > Regards, > > Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
