On OMAP4, MMC2 controller has eMMC which draws power from VAUX regulator on TWL. Though the eMMC supports dual voltage[1.8v/3v] as per ocr register, its VCC is fixed at 3V for operation. With this once the mmc core selects the minimum voltage supported based on the ocr value read from OCR register, eMMC will not get detected. Thus the platform data for MMC2 is updated with ocr mask and same will be communicated to core which will set the regulator to always operate at 3V when turned ON. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx> --- arch/arm/mach-omap2/board-4430sdp.c | 1 + drivers/mmc/host/omap_hsmmc.c | 12 ++++++++++++ 2 files changed, 13 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index ac8541c..9fd1044 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -202,6 +202,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, + .ocr_mask = MMC_VDD_29_30, }, {} /* Terminator */ }; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index bfca9ca..00d16d1 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -364,6 +364,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) { struct regulator *reg; int ret = 0; + int ocr_value = 0; switch (host->id) { case OMAP_MMC1_DEVID: @@ -396,6 +397,17 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) } } else { host->vcc = reg; + ocr_value = mmc_regulator_get_ocrmask(reg); + if (!mmc_slot(host).ocr_mask) { + mmc_slot(host).ocr_mask = ocr_value; + } else { + if (!(mmc_slot(host).ocr_mask & ocr_value)) { + pr_err("MMC%d ocrmask %x is not supported\n", + host->id, mmc_slot(host).ocr_mask); + mmc_slot(host).ocr_mask = 0; + return -EINVAL; + } + } mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); /* Allow an aux regulator */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html