On Thu, Sep 9, 2010 at 6:56 PM, Gary Thomas <gary@xxxxxxxxxxxx> wrote: > I'm trying to use McBSP4 with an external CODEC which is a > slave device (i.e. the OMAP generates the Frame Sync pulses) > In this mode, the BSP is purely the master of these signals. > > What can it possibly mean to get Frame Sync errors in this case > (I'm reading from the external CODEC)? > > FYI, my registers look like this: > PCR0: 0x00000f0f > RCR1: 0x00000040, RCR2: 0x00008041 > XCR1: 0x00000040, XCR2: 0x00008041 > SRGR1: 0x00000f07, SRGR2: 0x0000101f > > Any ideas or help? Have you set the right McBSP source clock? It's in DEVCONF1/2 registers. > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
