Venkii, On Tue, Sep 7, 2010 at 11:45 PM, venki kaps <venkiece2005@xxxxxxxxx> wrote: > Venkii, > On Tue, Sep 7, 2010 at 9:18 PM, venki kaps <venkiece2005@xxxxxxxxx> wrote: >> Venkii, >> >> On Tue, Sep 7, 2010 at 9:10 PM, Ming Lei <tom.leiming@xxxxxxxxx> wrote: >>> 2010/9/7 venki kaps <venkiece2005@xxxxxxxxx>: >>>> thanks for your good response. >>>> >>>> Venkii, >>>> >>>> On Tue, Sep 7, 2010 at 6:54 PM, Ming Lei <tom.leiming@xxxxxxxxx> wrote: >>>>> 2010/9/7 venki kaps <venkiece2005@xxxxxxxxx>: >>>>>> Dear USB experts, >>>>>> >>>>>> Is the same fix valid for omap3430 + 2.6.32 Kernel? >>>>>> >>>>>> I have been facing mp3 playback idle current consumption 20mA more >>>>>> after booting without USB cable connected >>>>>> but If USB cable detach and attach happen, then able to hit proper >>>>>> values otherwise irrespective of cold/warm reset >>>>>> the current values increases to 20mA. >>>>>> >>>>>> with cable, >>>>>> OTG_SYSCONFIG standby mode of operation - SMART idle >>>>>> HSOTGUSB_STANDBY - SMART standby >>>>>> >>>>>> without cable, >>>>>> OTG_SYSCONFIG standby mode of operation - SMART idle >>>>>> HSOTGUSB_STANDBY - Active >>>>>> >>>>>> Even i have applied patch but still the same issue. >>>>> >>>>> Are you applying the patch below? >>>>> >>>>> http://marc.info/?l=linux-omap&m=128378686221264&w=2 >>>>> >>>>> The patch(USB: otg: twl4030: fix phy initialization(v1)) above is against >>>>> 2.6.36-rc3, I don't think you can apply it directly on 2.6.32. And the patch >>>>> is introduced to fix the problems caused by >>>>> >>>>> commit 461c317705eca5cac09a360f488715927fd0a927. >>>>> >>>>> which change is committed into mainline 2.6.36-rc3. >>>> >>> Yes, this patch i have applied. >>> >>> If you applied the patch, I guess you may see __twl4030_phy_power(twl, 0) >>> is called from .probe. >>> >>> If called, seems your description a little contradictory since you observed >>> __twl4030_phy_power(twl, 0) may hit proper values, right? >> >> Yes, __twl4030_phy_power(twl, 0) - the current values are getting >> proper with or without cable. >>> >>> If not called, could you trace the return value of twl4030_usb_linkstat in >>> twl4030_usb_phy_init? >> ok, i can do that and update. > twl4030_usb_linkstat return value is zero (0) in both > twl4030_usb_phy_init/twl4030_usb_irq. WIth twl4030_usb_phy_init, Everything is fine except battery temperature but surprisingly the temperature is fine with PC based usb cable charger and the problem is with travel adapter only. >>> thanks, >>> >>> -- >>> Lei Ming >>> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
