2010/9/7 venki kaps <venkiece2005@xxxxxxxxx>:
> Dear USB experts,
>
> Is the same fix valid for omap3430 + 2.6.32 Kernel?
>
> I have been facing mp3 playback idle current consumption 20mA more
> after booting without USB cable connected
> but If USB cable detach and attach happen, then able to hit proper
> values otherwise irrespective of cold/warm reset
> the current values increases to 20mA.
>
> with cable,
> OTG_SYSCONFIG standby mode of operation - SMART idle
> HSOTGUSB_STANDBY - SMART standby
>
> without cable,
> OTG_SYSCONFIG standby mode of operation - SMART idle
> HSOTGUSB_STANDBY - Active
>
> Even i have applied patch but still the same issue.
Are you applying the patch below?
http://marc.info/?l=linux-omap&m=128378686221264&w=2
The patch(USB: otg: twl4030: fix phy initialization(v1)) above is against
2.6.36-rc3, I don't think you can apply it directly on 2.6.32. And the patch
is introduced to fix the problems caused by
commit 461c317705eca5cac09a360f488715927fd0a927.
which change is committed into mainline 2.6.36-rc3.
>
> If i use __twl4030_phy_power(twl, 0) at the end of USB LDO initialization,
If you apply this patch against 2.6.36-rc3, you will find
__twl4030_phy_power(twl, 0) is always called from .probe
if you don't connect musb with PC via cable when powering on.
> then able to hit proper values but USB ADC values are getting in correct
> with Travel adapter (Charger power supply) which means temperature
> shows 84 instead of 26~30 degrees.
>
> Queries,
> -----------
> - Is Errata 1.164 fix : OTG idle will work on 3430?
No such errata found in ti wetsite, could you give a link?
> - USBOTG_SUSPEND is enabled in Kernel 32, will it give any impact?
Kernel does not have USBOTG_SUSPEND config option. Do you
mean USB_SUSPEND? If so, it is nothing to do with your issue since
it is only valid for host driver. Also for your case, musb works at
b-idle state.
> - Is there anything missed from Power management idle path (or)
> USB OTG controller/Transreceiver driver part?
Maybe with transreceiver part, musb doesn't support runtime pm now.
>
> Could you please provide the best approach to solve my issue?
Sorry, this patch is not for your issue, as said above.
--
Lei Ming
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
