McBSP SRG (Sample Rate Generator) and FSG (Frame Sync Generator) is only needed to be enabled, when McBSP is master. In McBSP slave mode, the SRG, and FSG can be kept disabled, which might save some power at the end in this configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx> --- Hello Jarkko, I have tested this on OMAP3, but I think this should be applicable for other OMAP versions as well. When McBSP was slave the audio worked fine, when I left the SRG, and FSG disabled. arch/arm/plat-omap/mcbsp.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e31496e..ecbfe39 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -878,7 +878,7 @@ EXPORT_SYMBOL(omap_mcbsp_free); void omap_mcbsp_start(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; - int idle; + int enable_srg = 0; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -893,10 +893,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7; mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7; - idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); + /* Only enable SRG, if McBSP is master */ + w = MCBSP_READ_CACHE(mcbsp, PCR0); + if (w & (FSXM | FSRM | CLKXM | CLKRM)) + enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | + MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - if (idle) { + if (enable_srg) { /* Start the sample generator */ w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); @@ -919,7 +922,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) */ udelay(500); - if (idle) { + if (enable_srg) { /* Start frame sync */ w = MCBSP_READ_CACHE(mcbsp, SPCR2); MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); -- 1.7.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html