The port 2 of OHCI controller is connected to external PHY.
The Unidirection 6 pin serial mode is configured.
Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx>
---
arch/arm/mach-omap2/board-4430sdp.c | 6 ++++++
1 file changed, 6 insertions(+)
Index: linux-2.6/arch/arm/mach-omap2/board-4430sdp.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/board-4430sdp.c
+++ linux-2.6/arch/arm/mach-omap2/board-4430sdp.c
@@ -424,6 +424,11 @@ static const struct ehci_hcd_omap_platfo
.reset_gpio_port[2] = -EINVAL
};
+static const struct ohci_hcd_omap_platform_data ohci_pdata __initconst = {
+ .port_mode[0] = OMAP_OHCI_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+ .port_mode[2] = OMAP_OHCI_PORT_MODE_UNUSED,
+};
static int __init omap4_i2c_init(void)
{
/*
@@ -454,6 +459,7 @@ static void __init omap_4430sdp_init(voi
gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
}
usb_ehci_init(&ehci_pdata);
+ usb_ohci_init(&ohci_pdata);
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
