On Wed, Aug 18, 2010 at 04:55:43AM +0200, ext Keshava Munegowda wrote:
The PHY reset code is moved at the begining and end of the function
omap_start_ehc. This simplfies the writing clocks enabling code for
OMAP4 later.
Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx>
---
drivers/usb/host/ehci-omap.c | 52 +++++++++++++++++++++----------------------
1 file changed, 26 insertions(+), 26 deletions(-)
Index: linux-2.6/drivers/usb/host/ehci-omap.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ehci-omap.c
+++ linux-2.6/drivers/usb/host/ehci-omap.c
@@ -279,6 +279,24 @@ static int omap_start_ehc(struct ehci_hc
dev_dbg(omap->dev, "starting TI EHCI USB Controller\n");
+ if (omap->phy_reset) {
+ /* Refer: ISSUE1 */
+ if (gpio_is_valid(omap->reset_gpio_port[0])) {
+ gpio_request(omap->reset_gpio_port[0],
+ "USB1 PHY reset");
+ gpio_direction_output(omap->reset_gpio_port[0], 0);
+ }
+
+ if (gpio_is_valid(omap->reset_gpio_port[1])) {
+ gpio_request(omap->reset_gpio_port[1],
+ "USB2 PHY reset");
+ gpio_direction_output(omap->reset_gpio_port[1], 0);
+ }
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
there was another patch doing this with ulpi messages and that's more
portable as every board will have support for softreset but we can't
guarantee all of them will have these gpio routed correctly, right ?
--
balbi
DefectiveByDesign.org
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
