Op 29 jun 2010, om 22:32 heeft Sergio Aguirre het volgende geschreven:
> Following commit missed to remove this:
>
> commit 044d32ffbcb4a1d400088e3575508f46c0a9face
> Author: Koen Kooi <koen.kooi@xxxxxxxxx>
> Date: Thu Apr 22 10:23:42 2010 +0200
>
> board-omap3-beagle: add DSS2 support
>
> Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx>
> Cc: Koen Kooi <koen.kooi@xxxxxxxxx>
Looks good to me:
Acked-by: Koen Kooi <koen.kooi@xxxxxxxxx>
As a side note, the beagleboard xM uses a different pin for that.
regards,
Koen
> ---
> arch/arm/mach-omap2/board-omap3beagle.c | 7 ++-----
> 1 files changed, 2 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index 7b95cc1..867a4ad 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -169,6 +169,8 @@ static void __init beagle_display_init(void)
> {
> int r;
>
> + omap_mux_init_gpio(beagle_dvi_device.reset_gpio, OMAP_PIN_INPUT);
> +
> r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
> if (r < 0) {
> printk(KERN_ERR "Unable to get DVI reset GPIO\n");
> @@ -491,11 +493,6 @@ static void __init omap3_beagle_init(void)
> ARRAY_SIZE(omap3_beagle_devices));
> omap_serial_init();
>
> - omap_mux_init_gpio(170, OMAP_PIN_INPUT);
> - gpio_request(170, "DVI_nPD");
> - /* REVISIT leave DVI powered down until it's needed ... */
> - gpio_direction_output(170, true);
> -
> usb_musb_init(&musb_board_data);
> usb_ehci_init(&ehci_pdata);
> omap3beagle_flash_init();
> --
> 1.6.3.3
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
