It seems that the battery cover sensor in Nokia N900 is powered from the
V28 domain. Now if this regulator is disabled it causes that the gpio 160
reads only zero which effectively causes uSD removal detection.
Currently the bootloader enabled V28 is kept on but this may change in the
future according to comment in
drivers/regulator/core.c: regulator_has_full_constraints.
Also if there are any consumers on the V28 domain doing regulator_enable
regulator_disable cycle the V28 will be disabled after that.
Prepare for these by defining the V28 as always_on regulator.
Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx>
Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
This can be tested easily by setting full regulator constraints. Then the
regulator framework will disable in a late_initcall all the regulators with
zero use count and that don't have always_on flag set.
void __init rx51_peripherals_init(void)
{
+ regulator_has_full_constraints();
rx51_i2c_init();
board_onenand_init();
board_smc91x_init();
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index abdf321..aeeb91d 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@ static struct regulator_init_data rx51_vaux1 = {
.name = "V28",
.min_uV = 2800000,
.max_uV = 2800000,
+ .always_on = true, /* due battery cover sensor */
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
