Board file modified for not to provide gpmc phys_base address to nand driver.
The gpmc_nand_init funciton is now used to detect the nand and required to
adopt _prob function as in nand/omap2.c
Signed-off-by: Sukumar Ghorai <s-ghorai@xxxxxx>
---
arch/arm/mach-omap2/board-cm-t35.c | 20 +-------------------
arch/arm/mach-omap2/board-devkit8000.c | 25 +------------------------
arch/arm/mach-omap2/board-omap3beagle.c | 24 +-----------------------
arch/arm/mach-omap2/board-omap3touchbook.c | 25 +------------------------
arch/arm/mach-omap2/board-overo.c | 24 +-----------------------
5 files changed, 5 insertions(+), 113 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e679a2c..0544294
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -61,8 +61,6 @@
#define SB_T35_SMSC911X_GPIO 65
#define NAND_BLOCK_SIZE SZ_128K
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS0_BASE_ADDR (OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
@@ -223,28 +221,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
.nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
- .gpmc_cs_baseaddr = (void __iomem *)GPMC_CS0_BASE_ADDR,
- .gpmc_baseaddr = (void __iomem *)OMAP34XX_GPMC_VIRT,
};
-static struct resource cm_t35_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device cm_t35_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .num_resources = 1,
- .resource = &cm_t35_nand_resource,
- .dev = {
- .platform_data = &cm_t35_nand_data,
- },
-};
-
static void __init cm_t35_init_nand(void)
{
- if (platform_device_register(&cm_t35_nand_device) < 0)
+ if (gpmc_nand_init(&cm_t35_nand_data) < 0)
pr_err("CM-T35: Unable to register NAND device\n");
}
#else
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77022b5..9a8135d
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -58,9 +58,6 @@
#include "mux.h"
#include "hsmmc.h"
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
-
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP_DM9000_GPIO_IRQ 25
@@ -104,20 +101,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
-static struct resource devkit8000_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &devkit8000_nand_data,
- },
- .num_resources = 1,
- .resource = &devkit8000_nand_resource,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -581,8 +564,6 @@ static void __init devkit8000_flash_init(void)
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -604,13 +585,9 @@ static void __init devkit8000_flash_init(void)
if (nandcs < GPMC_CS_NUM) {
devkit8000_nand_data.cs = nandcs;
- devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- devkit8000_nand_data.gpmc_baseaddr = (void *)
- (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&devkit8000_nand_device) < 0)
+ if (gpmc_nand_init(&devkit8000_nand_data) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 69b154c..dc5a7e8
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -48,9 +48,6 @@
#include "mux.h"
#include "hsmmc.h"
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
-
#define NAND_BLOCK_SIZE SZ_128K
static struct mtd_partition omap3beagle_nand_partitions[] = {
@@ -93,20 +90,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = {
.dev_ready = NULL,
};
-static struct resource omap3beagle_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device omap3beagle_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &omap3beagle_nand_data,
- },
- .num_resources = 1,
- .resource = &omap3beagle_nand_resource,
-};
-
/* DSS */
static int beagle_enable_dvi(struct omap_dss_device *dssdev)
@@ -424,8 +407,6 @@ static void __init omap3beagle_flash_init(void)
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -447,12 +428,9 @@ static void __init omap3beagle_flash_init(void)
if (nandcs < GPMC_CS_NUM) {
omap3beagle_nand_data.cs = nandcs;
- omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&omap3beagle_nand_device) < 0)
+ if (gpmc_nand_init(&omap3beagle_nand_data) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2504d41..e8ad30c
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -54,9 +54,6 @@
#include <asm/setup.h>
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
-
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP3_AC_GPIO 136
@@ -106,20 +103,6 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = {
.dev_ready = NULL,
};
-static struct resource omap3touchbook_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device omap3touchbook_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &omap3touchbook_nand_data,
- },
- .num_resources = 1,
- .resource = &omap3touchbook_nand_resource,
-};
-
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap2_hsmmc_info mmc[] = {
@@ -459,8 +442,6 @@ static void __init omap3touchbook_flash_init(void)
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -482,13 +463,9 @@ static void __init omap3touchbook_flash_init(void)
if (nandcs < GPMC_CS_NUM) {
omap3touchbook_nand_data.cs = nandcs;
- omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- omap3touchbook_nand_data.gpmc_baseaddr =
- (void *) (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&omap3touchbook_nand_device) < 0)
+ if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac414..cddc7ad
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -58,8 +58,6 @@
#define OVERO_GPIO_USBH_NRESET 183
#define NAND_BLOCK_SIZE SZ_128K
-#define GPMC_CS0_BASE 0x60
-#define GPMC_CS_SIZE 0x30
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
@@ -231,28 +229,11 @@ static struct omap_nand_platform_data overo_nand_data = {
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
-static struct resource overo_nand_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device overo_nand_device = {
- .name = "omap2-nand",
- .id = -1,
- .dev = {
- .platform_data = &overo_nand_data,
- },
- .num_resources = 1,
- .resource = &overo_nand_resource,
-};
-
-
static void __init overo_flash_init(void)
{
u8 cs = 0;
u8 nandcs = GPMC_CS_NUM + 1;
- u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
/* find out the chip-select on which NAND exists */
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
@@ -274,12 +255,9 @@ static void __init overo_flash_init(void)
if (nandcs < GPMC_CS_NUM) {
overo_nand_data.cs = nandcs;
- overo_nand_data.gpmc_cs_baseaddr = (void *)
- (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
- overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (platform_device_register(&overo_nand_device) < 0)
+ if (gpmc_nand_init(&overo_nand_data) < 0)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
