From: Steve Sakoman <steve@xxxxxxxxxxx>
Some Overo add-on boards include a second ethernet port. This patch
adds support for that second port.
Signed-off-by: Steve Sakoman <steve@xxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/board-overo.c | 14 +++++++++++++-
1 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8848c7c..79ac414 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -63,6 +63,8 @@
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
+#define OVERO_SMSC911X2_CS 4
+#define OVERO_SMSC911X2_GPIO 65
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = {
},
};
+static struct resource overo_smsc911x2_resources[] = {
+ {
+ .name = "smsc911x2-memory",
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
static struct smsc911x_platform_config overo_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
@@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = {
static struct platform_device overo_smsc911x_device = {
.name = "smsc911x",
- .id = -1,
+ .id = 0,
.num_resources = ARRAY_SIZE(overo_smsc911x_resources),
.resource = overo_smsc911x_resources,
.dev = {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
