From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
This patch exports the OMAP3 IDCODE and Production ID to userspace
via /proc/cpuinfo using the system_soc_info.
Die ID is also exported depending on what users pass as kernel
parameter. It is same protection mechanism made for x86 product
number. So, if user passes "omap3_die_id" parameter, it will append
die id code into /proc/cpuinfo as well. A Kconfig option has been
added as well, so it can be configurable during compilation time.
This can be used to track down silicon specific issues. The info is
exported via /proc/cpuinfo because then it can be possible to include this
in corematic dumps.
This is based on Peter De Schrijver patch, which export same info via sysfs.
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
---
Documentation/kernel-parameters.txt | 2 +
arch/arm/mach-omap2/Kconfig | 10 +++++++++
arch/arm/mach-omap2/id.c | 37 +++++++++++++++++++++++++++++++++-
3 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 839b21b..6a84e6c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1809,6 +1809,8 @@ and is between 256 and 4096 characters. It is defined in the file
waiting for the ACK, so if this is set too high
interrupts *may* be lost!
+ omap3_die_id [OMAP] Append DIE ID info under /proc/cpuinfo
+
omap_mux= [OMAP] Override bootloader pin multiplexing.
Format: <mux_mode0.mode_name=value>...
For example, to override I2C bus2:
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 2455dcc..462c23a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -169,3 +169,13 @@ config OMAP3_SDRC_AC_TIMING
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
+config OMAP3_EXPORT_DIE_ID
+ bool "Export DIE ID code under /proc/cpuinfo"
+ depends on ARCH_OMAP3
+ default n
+ help
+ Say Y here if you need DIE ID code to be exported via /proc/cpuinfo
+ in production systems. You will need also to explicitly flag it by
+ appending the "omap3_die_id" parameter to your boot command line.
+
+
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 4702ffe..6fe554b 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -76,6 +76,10 @@ EXPORT_SYMBOL(omap_type);
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204
+#define OMAP_TAP_PROD_ID_0 0x0208
+#define OMAP_TAP_PROD_ID_1 0x020c
+#define OMAP_TAP_PROD_ID_2 0x0210
+#define OMAP_TAP_PROD_ID_3 0x0214
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
@@ -303,6 +307,7 @@ void __init omap4_check_revision(void)
void __init omap3_cpuinfo(void)
{
+ int sz;
u8 rev = GET_OMAP_REVISION();
char cpu_name[16], cpu_rev[16];
@@ -360,8 +365,8 @@ void __init omap3_cpuinfo(void)
}
/* Print verbose information */
- snprintf(system_soc_info, SYSTEM_SOC_INFO_SIZE, "%s ES%s", cpu_name,
- cpu_rev);
+ sz = snprintf(system_soc_info, SYSTEM_SOC_INFO_SIZE, "%s ES%s",
+ cpu_name, cpu_rev);
pr_info("%s (", system_soc_info);
OMAP3_SHOW_FEATURE(l2cache);
@@ -372,7 +377,35 @@ void __init omap3_cpuinfo(void)
OMAP3_SHOW_FEATURE(192mhz_clk);
printk(")\n");
+
+ /* Append OMAP3 IDCODE and Production ID to system_soc_info */
+ snprintf(system_soc_info + sz, SYSTEM_SOC_INFO_SIZE - sz,
+ "\n\tIDCODE\t: %08x\n\tPr. ID\t: %08x %08x %08x %08x",
+ read_tap_reg(OMAP_TAP_IDCODE),
+ read_tap_reg(OMAP_TAP_PROD_ID_0),
+ read_tap_reg(OMAP_TAP_PROD_ID_1),
+ read_tap_reg(OMAP_TAP_PROD_ID_2),
+ read_tap_reg(OMAP_TAP_PROD_ID_3));
+
+}
+
+#ifdef CONFIG_OMAP3_EXPORT_DIE_ID
+static int __init omap3_die_id_setup(char *s)
+{
+ int sz;
+
+ sz = strlen(system_soc_info);
+ snprintf(system_soc_info + sz, SYSTEM_SOC_INFO_SIZE - sz,
+ "\n\tDie ID\t: %08x %08x %08x %08x",
+ read_tap_reg(OMAP_TAP_DIE_ID_0),
+ read_tap_reg(OMAP_TAP_DIE_ID_1),
+ read_tap_reg(OMAP_TAP_DIE_ID_2),
+ read_tap_reg(OMAP_TAP_DIE_ID_3));
+
+ return 1;
}
+__setup("omap3_die_id", omap3_die_id_setup);
+#endif
/*
* Try to detect the exact revision of the omap we're running on
--
1.7.0.4.361.g8b5fe.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
