Re: [PATCH 12/16] OMAP3: PM: Support for enabling smartreflex autocompensation by default.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thara Gopinath <thara@xxxxxx> writes:

> This patch adds support to pdata enable smartreflex autocompenstion
> during init based on init_enable flag passed as pdata.
>
> This patch also adds enabling of autocompensation by
> default (setting init_enable flag to true) in case of ES3.1
> OMAP3430 chip. In the current implementation
> this step is kept in smartreflex.c itself.Later an API can be added
> so that the decision to enable autocompensation by default
> can be passed from the corresponding board files.
>
> Signed-off-by: Thara Gopinath <thara@xxxxxx>
> ---
>  arch/arm/mach-omap2/smartreflex.c |   32 ++++++++++++++++++++++++++++----
>  1 files changed, 28 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
> index 96dc76b..085dd05 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -477,9 +477,15 @@ void omap_sr_register_class(struct omap_smartreflex_class_data *class_data)
>  
>  	sr_class = class_data;
>  	/*
> -	 * Register the interrupt handler incase requested by the class driver
> +	 * Check if any SR module needs to be enabled as part of init.
> +	 * In case the probe for the SR module is not yet called the enable
> +	 * will not be done here but will be done in the probe whenever
> +	 * it gets called. Also register the interrupt handler incase
> +	 * requested by the class driver.
>  	 */
>  	list_for_each_entry(sr_info, &sr_list, node) {
> +		struct omap_smartreflex_data *pdata =
> +				sr_info->pdev->dev.platform_data;
>  		if (sr_class->class_type == SR_CLASS2 &&
>  				sr_class->notify_flags && sr_info->irq) {
>  			char name[SMARTREFLEX_NAME_LEN];
> @@ -496,6 +502,8 @@ void omap_sr_register_class(struct omap_smartreflex_class_data *class_data)
>  				return;
>  			}
>  		}
> +		if (pdata->init_enable)
> +			sr_start_vddautocomap(sr_info->srid);

I think this flag is better named enable_on_init.  

>  	}
>  }
>  
> @@ -562,11 +570,15 @@ static int __devinit omap_smartreflex_probe(struct platform_device *pdev)
>  	list_add(&sr_info->node, &sr_list);
>  
>  	/*
> -	 * Register interrrupt handler if smartreflex class driver is already
> -	 * registered and has requested for interrupts. This will be attempted
> +	 * Enable the smartreflex module if init_enable flag is set and
> +	 * if the class driver is registered. Also Register interrrupt handler
> +	 * if smartreflex class driver is already registered and has
> +	 * requested for interrupts. This will be attempted
>  	 * in the class driver register again if it does not happen here.
>  	 */
>  	if (sr_class) {
> +		struct omap_smartreflex_data *pdata = pdev->dev.platform_data;
> +
>  		if (sr_class->class_type == SR_CLASS2 &&
>  				sr_class->notify_flags && sr_info->irq) {
>  			sprintf(name, "sr%d", sr_info->srid);
> @@ -580,6 +592,8 @@ static int __devinit omap_smartreflex_probe(struct platform_device *pdev)
>  				return ret;
>  			}
>  		}
> +		if (pdata->init_enable)
> +			sr_start_vddautocomap(sr_info->srid);
>  	}

As with the duplicate request_irq() in previous patch, I don't follow
why it's the start is needed twice.  

Is it to handle the case where no class driver is installed?

>  
>  	pr_info("SmartReflex driver initialized\n");
> @@ -782,7 +796,17 @@ static int __init omap_devinit_smartreflex(void)
>  		if (WARN_ON(!sr_data))
>  			return -ENOMEM;
>  
> -		sr_data->init_enable = false;
> +		/*
> +		 * Enable the SR module by default if it is a OMAP3430
> +		 * ES3.1 chip

You should add a comment about why: starting with ES3.1, efuse values can be trusted?

> +		 */
> +		if (cpu_is_omap343x()) {
> +			if (omap_rev() == OMAP3430_REV_ES3_1)
> +				sr_data->init_enable = true;
> +			else
> +				sr_data->init_enable = false;
> +		} else
> +			sr_data->init_enable = false;
>  		sr_data->device_enable = omap_device_enable;
>  		sr_data->device_shutdown = omap_device_shutdown;
>  		sr_data->device_idle = omap_device_idle;

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux