From: Thara Gopinath <thara@omaplbp.(none)> This main motivations behind this patch series are the following 1. Making smartreflex a platform driver with omap-device layer. 2. Separating voltage specific code from smartreflex.c and other locations and consolidating them into voltage.c and voltage.h. 3. Smartreflex module can have Class 3 or Class 2 implementations depending on the PMIC in use. Making smartreflex.c capable of handling both the class implementaions and separating out class specific code into a separate class driver. 4. Implementating latest TI recommended register settings for Smartreflex and Voltage processor module as well as recommended sequences for enabling and disabling of Smartreflex and Voltage processor modules. 5. Implementing VP force update method of voltage scaling which is again TI hardware recommended. What this patch series does not address are 1. Separating PMIC specific portions from smartreflex and voltage code. 2. OMAP3630 and OMP4 smartreflex support. This patch series is based on Kevin's PM tree origin/pm-wip-opp branch and is dependent on the following patches not yet applied onto this branch. http://patchwork.kernel.org/patch/79523/ http://patchwork.kernel.org/patch/81504/ http://patchwork.kernel.org/patch/81606/ This patch series has been tested on OMAP3430 SDP with basic power management tests including the dvfs scripts. Thara Gopinath (16): OMAP3: PM: Adding hwmod data for Smartreflex OMAP3: PM: Create list to keep track of various smartreflex instances. OMAP3: PM: Convert smartreflex driver into a platform driver using hwmods and omap-device layer OMAP3: PM: Move smartreflex autocompensation enable disable hooks to PM debugfs. OMAP3: PM: Export get_vdd1_opp and get_vdd2_opp from shared resource framework OMAP3: PM: Smartreflex class related changes for smartreflex.c OMAP3: PM: Adding smartreflex class 3 driver. OMAP3: PM: Disabling Smartreflex across both frequency and voltage scaling during DVFS. OMAP3: PM: Creating separate files for handling OMAP3 voltage related operations. OMAP3: PM: Cleaning up of smartreflex header file. OMAP3: PM: Configurations for Smartreflex Class 2 and Smartreflex Class 3 OMAP3: PM: Support for enabling smartreflex autocompensation by default. OMAP3: PM: Correcting accessing of ERRCONFIG register in smartreflex.c OMAP3: PM: Implement latest h/w recommendations for SR and VP registers and SR VP enable disable sequence. OMAP3: PM: VP force update method of voltage scaling OMAP3: PM: Enabling Smartreflex Class 3 driver by default in pm defconfig arch/arm/configs/omap3_pm_defconfig | 1 + arch/arm/mach-omap2/Makefile | 4 +- arch/arm/mach-omap2/board-3430sdp.c | 3 +- arch/arm/mach-omap2/omap_hwmod_34xx.h | 92 ++ arch/arm/mach-omap2/pm-debug.c | 4 +- arch/arm/mach-omap2/pm.h | 7 - arch/arm/mach-omap2/pm34xx.c | 95 +-- arch/arm/mach-omap2/resource34xx.c | 28 +- arch/arm/mach-omap2/resource34xx.h | 1 - arch/arm/mach-omap2/smartreflex-class3.c | 54 ++ arch/arm/mach-omap2/smartreflex.c | 1431 +++++++++++++----------------- arch/arm/mach-omap2/smartreflex.h | 319 +++---- arch/arm/mach-omap2/voltage.c | 748 ++++++++++++++++ arch/arm/mach-omap2/voltage.h | 77 ++ arch/arm/plat-omap/Kconfig | 30 +- 15 files changed, 1805 insertions(+), 1089 deletions(-) create mode 100644 arch/arm/mach-omap2/smartreflex-class3.c create mode 100644 arch/arm/mach-omap2/voltage.c create mode 100644 arch/arm/mach-omap2/voltage.h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
