* Shilimkar, Santosh <santosh.shilimkar@xxxxxx> [100226 20:05]: > Tony, > What we do with patch now? It's more almost 6 months that this patch is > floating without merge. Well first we should test it for all omaps. So let's add it into omap-testing for a few days to make sure it does not break anything. Then let's ask Ben to queue it. Regards, Tony > > > -----Original Message----- > > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of > > Shilimkar, Santosh > > Sent: Friday, February 26, 2010 10:28 AM > > To: Tony Lindgren > > Cc: ben-linux@xxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; linux-i2c@xxxxxxxxxxxxxxx; Syed, Rafiuddin; Cory > > Maccarrone > > Subject: RE: [PATCH] omap: i2c: Add i2c support on omap4 platform > > > > Tony, > > > -----Original Message----- > > > From: Tony Lindgren [mailto:tony@xxxxxxxxxxx] > > > Sent: Friday, February 26, 2010 3:17 AM > > > To: Shilimkar, Santosh > > > Cc: ben-linux@xxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; linux-i2c@xxxxxxxxxxxxxxx; Syed, Rafiuddin; > > Cory > > > Maccarrone > > > Subject: Re: [PATCH] omap: i2c: Add i2c support on omap4 platform > > > > > > * Shilimkar, Santosh <santosh.shilimkar@xxxxxx> [100222 21:58]: > > > > Ben, > > > > Did you happen to look at this ? > > > > > > Santosh, can you please also please clarify which omaps this > > > patch has been tested on? > > > > > This patch is tested on OMAP3430 SDP and OMAP4430 SDP with regular defconfig > > builds and multi-omap build. > > > > > > > > -----Original Message----- > > > > > From: Shilimkar, Santosh > > > > > Sent: Friday, February 19, 2010 10:03 PM > > > > > To: ben-linux@xxxxxxxxx > > > > > Cc: linux-omap@xxxxxxxxxxxxxxx; linux-i2c@xxxxxxxxxxxxxxx; Shilimkar, Santosh; Syed, Rafiuddin; > > > Cory > > > > > Maccarrone > > > > > Subject: [PATCH] omap: i2c: Add i2c support on omap4 platform > > > > > > > > > > This patch is rebased version of earlier post to add I2C > > > > > driver support to OMAP4 platform. On OMAP4, all > > > > > I2C register address offsets are changed from OMAP1/2/3 I2C. > > > > > In order to not have #ifdef's at various places in code, > > > > > as well as to support multi-OMAP build, an array is created > > > > > to hold the register addresses with it's offset. > > > > > > > > > > This patch was submitted, reviewed and acked on mailing list > > > > > already. For more details refer below link > > > > > http://www.mail-archive.com/linux-i2c@xxxxxxxxxxxxxxx/msg02281.html > > > > > > > > > > This updated verion has a depedancy on "Add support for 16-bit registers" > > > > > posted on linux-omap. Below is the patch-works link for the same > > > > > > > > > > http://patchwork.kernel.org/patch/72295/ > > > > > > > > > > Signed-off-by: Syed Rafiuddin <rafiuddin.syed@xxxxxx> > > > > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > > > > > Acked-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > > > > > Reviewed-by: Paul Walmsley <paul@xxxxxxxxx> > > > > > Reviewed-by: Tony Lindgren <tony@xxxxxxxxxxx> > > > > > Cc: Ben Dooks <ben-linux@xxxxxxxxx> > > > > > Cc: Cory Maccarrone <darkstar6262@xxxxxxxxx> > > > > > --- > > > > > drivers/i2c/busses/i2c-omap.c | 146 ++++++++++++++++++++++++++++++++--------- > > > > > 1 files changed, 114 insertions(+), 32 deletions(-) > > > > > > > > > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > > > > > index 9c3ce4d..7c15496 100644 > > > > > --- a/drivers/i2c/busses/i2c-omap.c > > > > > +++ b/drivers/i2c/busses/i2c-omap.c > > > > > @@ -44,29 +44,37 @@ > > > > > /* I2C controller revisions present on specific hardware */ > > > > > #define OMAP_I2C_REV_ON_2430 0x36 > > > > > #define OMAP_I2C_REV_ON_3430 0x3C > > > > > +#define OMAP_I2C_REV_ON_4430 0x40 > > > > > > > > > > /* timeout waiting for the controller to respond */ > > > > > #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) > > > > > > > > > > -#define OMAP_I2C_REV_REG 0x00 > > > > > -#define OMAP_I2C_IE_REG 0x01 > > > > > -#define OMAP_I2C_STAT_REG 0x02 > > > > > -#define OMAP_I2C_IV_REG 0x03 > > > > > /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ > > > > > -#define OMAP_I2C_WE_REG 0x03 > > > > > -#define OMAP_I2C_SYSS_REG 0x04 > > > > > -#define OMAP_I2C_BUF_REG 0x05 > > > > > -#define OMAP_I2C_CNT_REG 0x06 > > > > > -#define OMAP_I2C_DATA_REG 0x07 > > > > > -#define OMAP_I2C_SYSC_REG 0x08 > > > > > -#define OMAP_I2C_CON_REG 0x09 > > > > > -#define OMAP_I2C_OA_REG 0x0a > > > > > -#define OMAP_I2C_SA_REG 0x0b > > > > > -#define OMAP_I2C_PSC_REG 0x0c > > > > > -#define OMAP_I2C_SCLL_REG 0x0d > > > > > -#define OMAP_I2C_SCLH_REG 0x0e > > > > > -#define OMAP_I2C_SYSTEST_REG 0x0f > > > > > -#define OMAP_I2C_BUFSTAT_REG 0x10 > > > > > +enum { > > > > > + OMAP_I2C_REV_REG = 0, > > > > > + OMAP_I2C_IE_REG, > > > > > + OMAP_I2C_STAT_REG, > > > > > + OMAP_I2C_IV_REG, > > > > > + OMAP_I2C_WE_REG, > > > > > + OMAP_I2C_SYSS_REG, > > > > > + OMAP_I2C_BUF_REG, > > > > > + OMAP_I2C_CNT_REG, > > > > > + OMAP_I2C_DATA_REG, > > > > > + OMAP_I2C_SYSC_REG, > > > > > + OMAP_I2C_CON_REG, > > > > > + OMAP_I2C_OA_REG, > > > > > + OMAP_I2C_SA_REG, > > > > > + OMAP_I2C_PSC_REG, > > > > > + OMAP_I2C_SCLL_REG, > > > > > + OMAP_I2C_SCLH_REG, > > > > > + OMAP_I2C_SYSTEST_REG, > > > > > + OMAP_I2C_BUFSTAT_REG, > > > > > + OMAP_I2C_REVNB_LO, > > > > > + OMAP_I2C_REVNB_HI, > > > > > + OMAP_I2C_IRQSTATUS_RAW, > > > > > + OMAP_I2C_IRQENABLE_SET, > > > > > + OMAP_I2C_IRQENABLE_CLR, > > > > > +}; > > > > > > > > > > /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ > > > > > #define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ > > > > > @@ -169,6 +177,7 @@ struct omap_i2c_dev { > > > > > u32 speed; /* Speed of bus in Khz */ > > > > > u16 cmd_err; > > > > > u8 *buf; > > > > > + u8 *regs; > > > > > size_t buf_len; > > > > > struct i2c_adapter adapter; > > > > > u8 fifo_size; /* use as flag and value > > > > > @@ -187,15 +196,64 @@ struct omap_i2c_dev { > > > > > u16 westate; > > > > > }; > > > > > > > > > > +const static u8 reg_map[] = { > > > > > + [OMAP_I2C_REV_REG] = 0x00, > > > > > + [OMAP_I2C_IE_REG] = 0x01, > > > > > + [OMAP_I2C_STAT_REG] = 0x02, > > > > > + [OMAP_I2C_IV_REG] = 0x03, > > > > > + [OMAP_I2C_WE_REG] = 0x03, > > > > > + [OMAP_I2C_SYSS_REG] = 0x04, > > > > > + [OMAP_I2C_BUF_REG] = 0x05, > > > > > + [OMAP_I2C_CNT_REG] = 0x06, > > > > > + [OMAP_I2C_DATA_REG] = 0x07, > > > > > + [OMAP_I2C_SYSC_REG] = 0x08, > > > > > + [OMAP_I2C_CON_REG] = 0x09, > > > > > + [OMAP_I2C_OA_REG] = 0x0a, > > > > > + [OMAP_I2C_SA_REG] = 0x0b, > > > > > + [OMAP_I2C_PSC_REG] = 0x0c, > > > > > + [OMAP_I2C_SCLL_REG] = 0x0d, > > > > > + [OMAP_I2C_SCLH_REG] = 0x0e, > > > > > + [OMAP_I2C_SYSTEST_REG] = 0x0f, > > > > > + [OMAP_I2C_BUFSTAT_REG] = 0x10, > > > > > +}; > > > > > + > > > > > +const static u8 omap4_reg_map[] = { > > > > > + [OMAP_I2C_REV_REG] = 0x04, > > > > > + [OMAP_I2C_IE_REG] = 0x2c, > > > > > + [OMAP_I2C_STAT_REG] = 0x28, > > > > > + [OMAP_I2C_IV_REG] = 0x34, > > > > > + [OMAP_I2C_WE_REG] = 0x34, > > > > > + [OMAP_I2C_SYSS_REG] = 0x90, > > > > > + [OMAP_I2C_BUF_REG] = 0x94, > > > > > + [OMAP_I2C_CNT_REG] = 0x98, > > > > > + [OMAP_I2C_DATA_REG] = 0x9c, > > > > > + [OMAP_I2C_SYSC_REG] = 0x20, > > > > > + [OMAP_I2C_CON_REG] = 0xa4, > > > > > + [OMAP_I2C_OA_REG] = 0xa8, > > > > > + [OMAP_I2C_SA_REG] = 0xac, > > > > > + [OMAP_I2C_PSC_REG] = 0xb0, > > > > > + [OMAP_I2C_SCLL_REG] = 0xb4, > > > > > + [OMAP_I2C_SCLH_REG] = 0xb8, > > > > > + [OMAP_I2C_SYSTEST_REG] = 0xbC, > > > > > + [OMAP_I2C_BUFSTAT_REG] = 0xc0, > > > > > + [OMAP_I2C_REVNB_LO] = 0x00, > > > > > + [OMAP_I2C_REVNB_HI] = 0x04, > > > > > + [OMAP_I2C_IRQSTATUS_RAW] = 0x24, > > > > > + [OMAP_I2C_IRQENABLE_SET] = 0x2c, > > > > > + [OMAP_I2C_IRQENABLE_CLR] = 0x30, > > > > > +}; > > > > > + > > > > > static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, > > > > > int reg, u16 val) > > > > > { > > > > > - __raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift)); > > > > > + __raw_writew(val, i2c_dev->base + > > > > > + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); > > > > > } > > > > > > > > > > static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) > > > > > { > > > > > - return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift)); > > > > > + return __raw_readw(i2c_dev->base + > > > > > + (i2c_dev->regs[reg] << i2c_dev->reg_shift)); > > > > > } > > > > > > > > > > static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) > > > > > @@ -264,7 +322,11 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) > > > > > WARN_ON(dev->idle); > > > > > > > > > > dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); > > > > > - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); > > > > > + if (dev->rev >= OMAP_I2C_REV_ON_4430) > > > > > + omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1); > > > > > + else > > > > > + omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); > > > > > + > > > > > if (dev->rev < OMAP_I2C_REV_2) { > > > > > iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ > > > > > } else { > > > > > @@ -329,7 +391,9 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) > > > > > * REVISIT: Some wkup sources might not be needed. > > > > > */ > > > > > dev->westate = OMAP_I2C_WE_ALL; > > > > > - omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); > > > > > + if (dev->rev < OMAP_I2C_REV_ON_4430) > > > > > + omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, > > > > > + dev->westate); > > > > > } > > > > > } > > > > > omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); > > > > > @@ -356,7 +420,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) > > > > > psc = fclk_rate / 12000000; > > > > > } > > > > > > > > > > - if (cpu_is_omap2430() || cpu_is_omap34xx()) { > > > > > + if (!(cpu_class_is_omap1() || cpu_is_omap2420())) { > > > > > > > > > > /* > > > > > * HSI2C controller internal clk rate should be 19.2 Mhz for > > > > > @@ -746,9 +810,12 @@ complete: > > > > > if (dev->buf_len) { > > > > > *dev->buf++ = w; > > > > > dev->buf_len--; > > > > > - /* Data reg from 2430 is 8 bit wide */ > > > > > - if (!cpu_is_omap2430() && > > > > > - !cpu_is_omap34xx()) { > > > > > + /* > > > > > + * Data reg in 2430, omap3 and > > > > > + * omap4 is 8 bit wide > > > > > + */ > > > > > + if (cpu_class_is_omap1() || > > > > > + cpu_is_omap2420()) { > > > > > if (dev->buf_len) { > > > > > *dev->buf++ = w >> 8; > > > > > dev->buf_len--; > > > > > @@ -786,9 +853,12 @@ complete: > > > > > if (dev->buf_len) { > > > > > w = *dev->buf++; > > > > > dev->buf_len--; > > > > > - /* Data reg from 2430 is 8 bit wide */ > > > > > - if (!cpu_is_omap2430() && > > > > > - !cpu_is_omap34xx()) { > > > > > + /* > > > > > + * Data reg in 2430, omap3 and > > > > > + * omap4 is 8 bit wide > > > > > + */ > > > > > + if (cpu_class_is_omap1() || > > > > > + cpu_is_omap2420()) { > > > > > if (dev->buf_len) { > > > > > w |= *dev->buf++ << 8; > > > > > dev->buf_len--; > > > > > @@ -897,6 +967,8 @@ omap_i2c_probe(struct platform_device *pdev) > > > > > > > > > > if (cpu_is_omap7xx()) > > > > > dev->reg_shift = 1; > > > > > + else if (cpu_is_omap44xx()) > > > > > + dev->reg_shift = 0; > > > > > else > > > > > dev->reg_shift = 2; > > > > > > > > > > @@ -911,11 +983,16 @@ omap_i2c_probe(struct platform_device *pdev) > > > > > if ((r = omap_i2c_get_clocks(dev)) != 0) > > > > > goto err_iounmap; > > > > > > > > > > + if (cpu_is_omap44xx()) > > > > > + dev->regs = (u8 *) omap4_reg_map; > > > > > + else > > > > > + dev->regs = (u8 *) reg_map; > > > > > + > > > > > omap_i2c_unidle(dev); > > > > > > > > > > dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; > > > > > > > > > > - if (cpu_is_omap2430() || cpu_is_omap34xx()) { > > > > > + if (!(cpu_class_is_omap1() || cpu_is_omap2420())) { > > > > > u16 s; > > > > > > > > > > /* Set up the fifo size - Get total size */ > > > > > @@ -927,8 +1004,13 @@ omap_i2c_probe(struct platform_device *pdev) > > > > > * size. This is to ensure that we can handle the status on int > > > > > * call back latencies. > > > > > */ > > > > > - dev->fifo_size = (dev->fifo_size / 2); > > > > > - dev->b_hw = 1; /* Enable hardware fixes */ > > > > > + if (dev->rev >= OMAP_I2C_REV_ON_4430) { > > > > > + dev->fifo_size = 0; > > > > > + dev->b_hw = 0; /* Disable hardware fixes */ > > > > > + } else { > > > > > + dev->fifo_size = (dev->fifo_size / 2); > > > > > + dev->b_hw = 1; /* Enable hardware fixes */ > > > > > + } > > > > > } > > > > > > > > > > /* reset ASAP, clearing any IRQs */ > > > > > -- > > > > > 1.6.0.4 > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
