Nishanth Menon <nm@xxxxxx> writes: > Kevin Hilman had written, on 01/29/2010 06:26 PM, the following: >> Update omap3_defconfig to work towards a minimal kernel by building >> most things as modules. Some drivers that cannot currently be built >> as modules and need to be fixed: >> >> - MMC: platform code uses MMC core regulator functions directly >> - ASoC: drivers call omap_ctrl_[read|write] directly >> >> In addition some additional changes: >> >> - use new SLUB allocator instead of SLAB (increased debugability) >> - compile with PREEMPT enabled by default >> - disable OABI_COMPAT. We should not pretend to support this IMHO > > Curious: Does'nt most of busybox build's fail to boot without this? > Any busybox build using OABI needs to be fixed, or let them manually re-enable OABI compat in the kernel config. >> - disable CPUfreq: not yet supported in mainline >> - disable PM_DEBUG_VERBOSE >> - enable fb/DSS2 as modules >> - disable Kprobes >> >> zImage size comparison >> before: 3160272 >> after: 2610108 >> >> Some ideas for reducing this further: >> - fix MMC and ASoC, then build those as modules >> - disable all the kernel debug features >> - convert MTD and all flash fs to modules >> >> Then, we should have platform specific initramfs configs so rootfs >> from flash, MMC, etc. could be done using modules in initramfs. > > How would we boot a system such as beagleboard new generation which > may only have MMC from defconfig? > > hmm.. we could in theory get u-boot to load up an initial intramfs > with modules, use that to mount a final filesystem etc.. but it is > going to be a big pain if we were to do it.. IMHO, having flash, MMC, > network will ease for developers to send quick tested solutions to > us. Now, not that I am saying that the idea is bad - it is just a > matter of trouble we might cause- how about a omap3_tiny_defconfig? I am trying to work towards a common defconfig that builds a minimal kernel. We need to move towards a small kernel and doing platform specific init in initramfs. Of course the distros for beagle or any other boards can use whatever defconfig they would like, and re-enable MMC as built-in. Kevin >> >> Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> >> --- >> arch/arm/configs/omap3_defconfig | 215 ++++++++++++++++++++------------------ >> 1 files changed, 112 insertions(+), 103 deletions(-) >> >> diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig >> index 2bc80d7..247f191 100644 >> --- a/arch/arm/configs/omap3_defconfig >> +++ b/arch/arm/configs/omap3_defconfig >> @@ -1,7 +1,7 @@ >> # >> # Automatically generated make config: don't edit >> # Linux kernel version: 2.6.33-rc5 >> -# Tue Jan 26 11:05:31 2010 >> +# Fri Jan 29 16:02:40 2010 >> # >> CONFIG_ARM=y >> CONFIG_SYS_SUPPORTS_APM_EMULATION=y >> @@ -32,6 +32,7 @@ CONFIG_CONSTRUCTORS=y >> # >> CONFIG_EXPERIMENTAL=y >> CONFIG_BROKEN_ON_SMP=y >> +CONFIG_LOCK_KERNEL=y >> CONFIG_INIT_ENV_ARG_LIMIT=32 >> CONFIG_LOCALVERSION="" >> CONFIG_LOCALVERSION_AUTO=y >> @@ -105,16 +106,16 @@ CONFIG_AIO=y >> # Kernel Performance Events And Counters >> # >> CONFIG_VM_EVENT_COUNTERS=y >> +# CONFIG_SLUB_DEBUG is not set >> CONFIG_COMPAT_BRK=y >> -CONFIG_SLAB=y >> -# CONFIG_SLUB is not set >> +# CONFIG_SLAB is not set >> +CONFIG_SLUB=y >> # CONFIG_SLOB is not set >> CONFIG_PROFILING=y >> CONFIG_TRACEPOINTS=y >> -CONFIG_OPROFILE=y >> +CONFIG_OPROFILE=m >> CONFIG_HAVE_OPROFILE=y >> -CONFIG_KPROBES=y >> -CONFIG_KRETPROBES=y >> +# CONFIG_KPROBES is not set >> CONFIG_HAVE_KPROBES=y >> CONFIG_HAVE_KRETPROBES=y >> CONFIG_HAVE_CLK=y >> @@ -125,7 +126,6 @@ CONFIG_HAVE_CLK=y >> # CONFIG_GCOV_KERNEL is not set >> # CONFIG_SLOW_WORK is not set >> CONFIG_HAVE_GENERIC_DMA_COHERENT=y >> -CONFIG_SLABINFO=y >> CONFIG_RT_MUTEXES=y >> CONFIG_BASE_SMALL=0 >> CONFIG_MODULES=y >> @@ -251,7 +251,7 @@ CONFIG_OMAP_MUX=y >> CONFIG_OMAP_MUX_DEBUG=y >> CONFIG_OMAP_MUX_WARNINGS=y >> CONFIG_OMAP_MCBSP=y >> -# CONFIG_OMAP_MBOX_FWK is not set >> +CONFIG_OMAP_MBOX_FWK=m >> # CONFIG_OMAP_MPU_TIMER is not set >> CONFIG_OMAP_32K_TIMER=y >> CONFIG_OMAP_32K_TIMER_HZ=128 >> @@ -354,13 +354,14 @@ CONFIG_VMSPLIT_3G=y >> # CONFIG_VMSPLIT_2G is not set >> # CONFIG_VMSPLIT_1G is not set >> CONFIG_PAGE_OFFSET=0xC0000000 >> -CONFIG_PREEMPT_NONE=y >> +# CONFIG_PREEMPT_NONE is not set >> # CONFIG_PREEMPT_VOLUNTARY is not set >> -# CONFIG_PREEMPT is not set >> +CONFIG_PREEMPT=y >> CONFIG_HZ=128 >> # CONFIG_THUMB2_KERNEL is not set >> CONFIG_AEABI=y >> -CONFIG_OABI_COMPAT=y >> +# CONFIG_OABI_COMPAT is not set >> +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y >> # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set >> # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set >> # CONFIG_HIGHMEM is not set >> @@ -394,21 +395,12 @@ CONFIG_ATAGS_PROC=y >> # >> # CPU Power Management >> # >> -CONFIG_CPU_FREQ=y >> -CONFIG_CPU_FREQ_TABLE=y >> -# CONFIG_CPU_FREQ_DEBUG is not set >> -CONFIG_CPU_FREQ_STAT=y >> -CONFIG_CPU_FREQ_STAT_DETAILS=y >> -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y >> +# CONFIG_CPU_FREQ is not set >> +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set >> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set >> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set >> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set >> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set >> -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y >> -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set >> -CONFIG_CPU_FREQ_GOV_USERSPACE=y >> -CONFIG_CPU_FREQ_GOV_ONDEMAND=y >> -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set >> # CONFIG_CPU_IDLE is not set >> >> # >> @@ -439,11 +431,10 @@ CONFIG_BINFMT_MISC=y >> # >> CONFIG_PM=y >> CONFIG_PM_DEBUG=y >> -CONFIG_PM_VERBOSE=y >> +# CONFIG_PM_VERBOSE is not set >> CONFIG_CAN_PM_TRACE=y >> CONFIG_PM_SLEEP=y >> CONFIG_SUSPEND=y >> -# CONFIG_PM_TEST_SUSPEND is not set >> CONFIG_SUSPEND_FREEZER=y >> # CONFIG_APM_EMULATION is not set >> # CONFIG_PM_RUNTIME is not set >> @@ -539,32 +530,31 @@ CONFIG_NETFILTER_ADVANCED=y >> # Network testing >> # >> # CONFIG_NET_PKTGEN is not set >> -# CONFIG_NET_TCPPROBE is not set >> # CONFIG_NET_DROP_MONITOR is not set >> # CONFIG_HAMRADIO is not set >> # CONFIG_CAN is not set >> # CONFIG_IRDA is not set >> -CONFIG_BT=y >> -CONFIG_BT_L2CAP=y >> -CONFIG_BT_SCO=y >> -CONFIG_BT_RFCOMM=y >> +CONFIG_BT=m >> +CONFIG_BT_L2CAP=m >> +CONFIG_BT_SCO=m >> +CONFIG_BT_RFCOMM=m >> CONFIG_BT_RFCOMM_TTY=y >> -CONFIG_BT_BNEP=y >> +CONFIG_BT_BNEP=m >> CONFIG_BT_BNEP_MC_FILTER=y >> CONFIG_BT_BNEP_PROTO_FILTER=y >> -CONFIG_BT_HIDP=y >> +CONFIG_BT_HIDP=m >> >> # >> # Bluetooth device drivers >> # >> # CONFIG_BT_HCIBTUSB is not set >> # CONFIG_BT_HCIBTSDIO is not set >> -CONFIG_BT_HCIUART=y >> +CONFIG_BT_HCIUART=m >> CONFIG_BT_HCIUART_H4=y >> CONFIG_BT_HCIUART_BCSP=y >> CONFIG_BT_HCIUART_LL=y >> -CONFIG_BT_HCIBCM203X=y >> -CONFIG_BT_HCIBPA10X=y >> +CONFIG_BT_HCIBCM203X=m >> +CONFIG_BT_HCIBPA10X=m >> # CONFIG_BT_HCIBFUSB is not set >> # CONFIG_BT_HCIVHCI is not set >> # CONFIG_BT_MRVL is not set >> @@ -672,7 +662,6 @@ CONFIG_MTD_CFI_UTIL=y >> # CONFIG_MTD_COMPLEX_MAPPINGS is not set >> # CONFIG_MTD_PHYSMAP is not set >> # CONFIG_MTD_ARM_INTEGRATOR is not set >> -CONFIG_MTD_OMAP_NOR=y >> # CONFIG_MTD_PLATRAM is not set >> >> # >> @@ -770,7 +759,7 @@ CONFIG_HAVE_IDE=y >> # SCSI device support >> # >> # CONFIG_RAID_ATTRS is not set >> -CONFIG_SCSI=y >> +CONFIG_SCSI=m >> CONFIG_SCSI_DMA=y >> # CONFIG_SCSI_TGT is not set >> # CONFIG_SCSI_NETLINK is not set >> @@ -779,7 +768,7 @@ CONFIG_SCSI_PROC_FS=y >> # >> # SCSI support type (disk, tape, CD-ROM) >> # >> -CONFIG_BLK_DEV_SD=y >> +CONFIG_BLK_DEV_SD=m >> # CONFIG_CHR_DEV_ST is not set >> # CONFIG_CHR_DEV_OSST is not set >> # CONFIG_BLK_DEV_SR is not set >> @@ -844,7 +833,7 @@ CONFIG_SMC91X=y >> # CONFIG_DM9000 is not set >> # CONFIG_ENC28J60 is not set >> # CONFIG_ETHOC is not set >> -# CONFIG_SMC911X is not set >> +CONFIG_SMC911X=y >> CONFIG_SMSC911X=y >> # CONFIG_DNET is not set >> # CONFIG_IBM_NEW_EMAC_ZMII is not set >> @@ -872,9 +861,9 @@ CONFIG_WLAN=y >> # CONFIG_B43LEGACY is not set >> # CONFIG_HOSTAP is not set >> # CONFIG_IWM is not set >> -CONFIG_LIBERTAS=y >> -CONFIG_LIBERTAS_USB=y >> -CONFIG_LIBERTAS_SDIO=y >> +CONFIG_LIBERTAS=m >> +CONFIG_LIBERTAS_USB=m >> +CONFIG_LIBERTAS_SDIO=m >> # CONFIG_LIBERTAS_SPI is not set >> CONFIG_LIBERTAS_DEBUG=y >> # CONFIG_P54_COMMON is not set >> @@ -893,25 +882,25 @@ CONFIG_LIBERTAS_DEBUG=y >> # CONFIG_USB_KAWETH is not set >> # CONFIG_USB_PEGASUS is not set >> # CONFIG_USB_RTL8150 is not set >> -CONFIG_USB_USBNET=y >> -CONFIG_USB_NET_AX8817X=y >> -CONFIG_USB_NET_CDCETHER=y >> +CONFIG_USB_USBNET=m >> +CONFIG_USB_NET_AX8817X=m >> +CONFIG_USB_NET_CDCETHER=m >> # CONFIG_USB_NET_CDC_EEM is not set >> # CONFIG_USB_NET_DM9601 is not set >> # CONFIG_USB_NET_SMSC95XX is not set >> # CONFIG_USB_NET_GL620A is not set >> -CONFIG_USB_NET_NET1080=y >> +CONFIG_USB_NET_NET1080=m >> # CONFIG_USB_NET_PLUSB is not set >> # CONFIG_USB_NET_MCS7830 is not set >> # CONFIG_USB_NET_RNDIS_HOST is not set >> -CONFIG_USB_NET_CDC_SUBSET=y >> +CONFIG_USB_NET_CDC_SUBSET=m >> CONFIG_USB_ALI_M5632=y >> CONFIG_USB_AN2720=y >> CONFIG_USB_BELKIN=y >> CONFIG_USB_ARMLINUX=y >> CONFIG_USB_EPSON2888=y >> CONFIG_USB_KC2190=y >> -CONFIG_USB_NET_ZAURUS=y >> +CONFIG_USB_NET_ZAURUS=m >> # CONFIG_USB_NET_INT51X1 is not set >> # CONFIG_WAN is not set >> # CONFIG_PPP is not set >> @@ -933,11 +922,11 @@ CONFIG_INPUT=y >> # >> # Userland interfaces >> # >> -CONFIG_INPUT_MOUSEDEV=y >> +CONFIG_INPUT_MOUSEDEV=m >> CONFIG_INPUT_MOUSEDEV_PSAUX=y >> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 >> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 >> -CONFIG_INPUT_JOYDEV=y >> +CONFIG_INPUT_JOYDEV=m >> CONFIG_INPUT_EVDEV=y >> # CONFIG_INPUT_EVBUG is not set >> >> @@ -961,7 +950,7 @@ CONFIG_KEYBOARD_GPIO=y >> CONFIG_KEYBOARD_TWL4030=y >> # CONFIG_KEYBOARD_XTKBD is not set >> CONFIG_INPUT_MOUSE=y >> -CONFIG_MOUSE_PS2=y >> +CONFIG_MOUSE_PS2=m >> CONFIG_MOUSE_PS2_ALPS=y >> CONFIG_MOUSE_PS2_LOGIPS2PP=y >> CONFIG_MOUSE_PS2_SYNAPTICS=y >> @@ -978,7 +967,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y >> # CONFIG_INPUT_JOYSTICK is not set >> # CONFIG_INPUT_TABLET is not set >> CONFIG_INPUT_TOUCHSCREEN=y >> -CONFIG_TOUCHSCREEN_ADS7846=y >> +CONFIG_TOUCHSCREEN_ADS7846=m >> # CONFIG_TOUCHSCREEN_AD7877 is not set >> # CONFIG_TOUCHSCREEN_AD7879_I2C is not set >> # CONFIG_TOUCHSCREEN_AD7879_SPI is not set >> @@ -1037,7 +1026,7 @@ CONFIG_DEVKMEM=y >> # >> CONFIG_SERIAL_8250=y >> CONFIG_SERIAL_8250_CONSOLE=y >> -CONFIG_SERIAL_8250_NR_UARTS=32 >> +CONFIG_SERIAL_8250_NR_UARTS=4 >> CONFIG_SERIAL_8250_RUNTIME_UARTS=4 >> CONFIG_SERIAL_8250_EXTENDED=y >> CONFIG_SERIAL_8250_MANY_PORTS=y >> @@ -1055,9 +1044,9 @@ CONFIG_UNIX98_PTYS=y >> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set >> # CONFIG_LEGACY_PTYS is not set >> # CONFIG_IPMI_HANDLER is not set >> -CONFIG_HW_RANDOM=y >> +CONFIG_HW_RANDOM=m >> # CONFIG_HW_RANDOM_TIMERIOMEM is not set >> -CONFIG_HW_RANDOM_OMAP=y >> +CONFIG_HW_RANDOM_OMAP=m >> # CONFIG_R3964 is not set >> # CONFIG_RAW_DRIVER is not set >> # CONFIG_TCG_TPM is not set >> @@ -1110,7 +1099,7 @@ CONFIG_SPI_MASTER=y >> # >> # CONFIG_SPI_BITBANG is not set >> # CONFIG_SPI_GPIO is not set >> -CONFIG_SPI_OMAP24XX=y >> +CONFIG_SPI_OMAP24XX=m >> # CONFIG_SPI_XILINX is not set >> # CONFIG_SPI_DESIGNWARE is not set >> >> @@ -1156,7 +1145,7 @@ CONFIG_GPIO_TWL4030=y >> # >> # AC97 GPIO expanders: >> # >> -CONFIG_W1=y >> +CONFIG_W1=m >> CONFIG_W1_CON=y >> >> # >> @@ -1177,14 +1166,14 @@ CONFIG_W1_CON=y >> # CONFIG_W1_SLAVE_DS2433 is not set >> # CONFIG_W1_SLAVE_DS2760 is not set >> # CONFIG_W1_SLAVE_BQ27000 is not set >> -CONFIG_POWER_SUPPLY=y >> +CONFIG_POWER_SUPPLY=m >> # CONFIG_POWER_SUPPLY_DEBUG is not set >> # CONFIG_PDA_POWER is not set >> # CONFIG_BATTERY_DS2760 is not set >> # CONFIG_BATTERY_DS2782 is not set >> # CONFIG_BATTERY_BQ27x00 is not set >> # CONFIG_BATTERY_MAX17040 is not set >> -CONFIG_HWMON=y >> +CONFIG_HWMON=m >> # CONFIG_HWMON_VID is not set >> # CONFIG_HWMON_DEBUG_CHIP is not set >> >> @@ -1264,8 +1253,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y >> # Watchdog Device Drivers >> # >> # CONFIG_SOFT_WATCHDOG is not set >> -CONFIG_OMAP_WATCHDOG=y >> -CONFIG_TWL4030_WATCHDOG=y >> +CONFIG_OMAP_WATCHDOG=m >> +CONFIG_TWL4030_WATCHDOG=m >> >> # >> # USB-based Watchdog Cards >> @@ -1289,7 +1278,7 @@ CONFIG_MFD_CORE=y >> # CONFIG_TPS65010 is not set >> # CONFIG_MENELAUS is not set >> CONFIG_TWL4030_CORE=y >> -# CONFIG_TWL4030_POWER is not set >> +CONFIG_TWL4030_POWER=y >> CONFIG_TWL4030_CODEC=y >> # CONFIG_MFD_TMIO is not set >> # CONFIG_MFD_T7L66XB is not set >> @@ -1325,13 +1314,13 @@ CONFIG_REGULATOR_TWL4030=y >> # >> # CONFIG_VGASTATE is not set >> # CONFIG_VIDEO_OUTPUT_CONTROL is not set >> -CONFIG_FB=y >> +CONFIG_FB=m >> CONFIG_FIRMWARE_EDID=y >> # CONFIG_FB_DDC is not set >> # CONFIG_FB_BOOT_VESA_SUPPORT is not set >> -CONFIG_FB_CFB_FILLRECT=y >> -CONFIG_FB_CFB_COPYAREA=y >> -CONFIG_FB_CFB_IMAGEBLIT=y >> +CONFIG_FB_CFB_FILLRECT=m >> +CONFIG_FB_CFB_COPYAREA=m >> +CONFIG_FB_CFB_IMAGEBLIT=m >> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set >> # CONFIG_FB_SYS_FILLRECT is not set >> # CONFIG_FB_SYS_COPYAREA is not set >> @@ -1354,25 +1343,38 @@ CONFIG_FB_TILEBLITTING=y >> # CONFIG_FB_METRONOME is not set >> # CONFIG_FB_MB862XX is not set >> # CONFIG_FB_BROADSHEET is not set >> -CONFIG_FB_OMAP=y >> CONFIG_FB_OMAP_LCD_VGA=y >> -# CONFIG_FB_OMAP_031M3R is not set >> -# CONFIG_FB_OMAP_048M3R is not set >> -CONFIG_FB_OMAP_079M3R=y >> -# CONFIG_FB_OMAP_092M9R is not set >> -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set >> -# CONFIG_FB_OMAP_LCD_MIPID is not set >> # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set >> -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 >> -# CONFIG_OMAP2_DSS is not set >> +CONFIG_OMAP2_VRAM=y >> +CONFIG_OMAP2_VRFB=y >> +CONFIG_OMAP2_DSS=m >> +CONFIG_OMAP2_VRAM_SIZE=4 >> +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y >> +# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set >> +# CONFIG_OMAP2_DSS_RFBI is not set >> +CONFIG_OMAP2_DSS_VENC=y >> +# CONFIG_OMAP2_DSS_SDI is not set >> +# CONFIG_OMAP2_DSS_DSI is not set >> +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set >> +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 >> +CONFIG_FB_OMAP2=m >> +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y >> +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set >> +CONFIG_FB_OMAP2_NUM_FBS=3 >> + >> +# >> +# OMAP2/3 Display Device Drivers >> +# >> +CONFIG_PANEL_GENERIC=m >> +CONFIG_PANEL_SHARP_LS037V7DW01=m >> CONFIG_BACKLIGHT_LCD_SUPPORT=y >> -CONFIG_LCD_CLASS_DEVICE=y >> +CONFIG_LCD_CLASS_DEVICE=m >> # CONFIG_LCD_LMS283GF05 is not set >> # CONFIG_LCD_LTV350QV is not set >> # CONFIG_LCD_ILI9320 is not set >> # CONFIG_LCD_TDO24M is not set >> # CONFIG_LCD_VGG2432A4 is not set >> -CONFIG_LCD_PLATFORM=y >> +CONFIG_LCD_PLATFORM=m >> CONFIG_BACKLIGHT_CLASS_DEVICE=y >> CONFIG_BACKLIGHT_GENERIC=y >> >> @@ -1390,7 +1392,7 @@ CONFIG_DISPLAY_SUPPORT=y >> # >> # CONFIG_VGA_CONSOLE is not set >> CONFIG_DUMMY_CONSOLE=y >> -CONFIG_FRAMEBUFFER_CONSOLE=y >> +CONFIG_FRAMEBUFFER_CONSOLE=m >> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set >> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y >> CONFIG_FONTS=y >> @@ -1414,13 +1416,13 @@ CONFIG_SOUND_OSS_CORE_PRECLAIM=y >> CONFIG_SND=y >> CONFIG_SND_TIMER=y >> CONFIG_SND_PCM=y >> -CONFIG_SND_HWDEP=y >> -CONFIG_SND_RAWMIDI=y >> +CONFIG_SND_HWDEP=m >> +CONFIG_SND_RAWMIDI=m >> CONFIG_SND_JACK=y >> # CONFIG_SND_SEQUENCER is not set >> CONFIG_SND_OSSEMUL=y >> -CONFIG_SND_MIXER_OSS=y >> -CONFIG_SND_PCM_OSS=y >> +CONFIG_SND_MIXER_OSS=m >> +CONFIG_SND_PCM_OSS=m >> CONFIG_SND_PCM_OSS_PLUGINS=y >> # CONFIG_SND_HRTIMER is not set >> # CONFIG_SND_DYNAMIC_MINORS is not set >> @@ -1443,7 +1445,7 @@ CONFIG_SND_DRIVERS=y >> CONFIG_SND_ARM=y >> CONFIG_SND_SPI=y >> CONFIG_SND_USB=y >> -CONFIG_SND_USB_AUDIO=y >> +CONFIG_SND_USB_AUDIO=m >> # CONFIG_SND_USB_CAIAQ is not set >> CONFIG_SND_SOC=y >> CONFIG_SND_OMAP_SOC=y >> @@ -1468,11 +1470,17 @@ CONFIG_HID=y >> # >> # USB Input Devices >> # >> -CONFIG_USB_HID=y >> +CONFIG_USB_HID=m >> # CONFIG_HID_PID is not set >> # CONFIG_USB_HIDDEV is not set >> >> # >> +# USB HID Boot Protocol drivers >> +# >> +# CONFIG_USB_KBD is not set >> +# CONFIG_USB_MOUSE is not set >> + >> +# >> # Special HID drivers >> # >> # CONFIG_HID_A4TECH is not set >> @@ -1506,7 +1514,7 @@ CONFIG_USB_SUPPORT=y >> CONFIG_USB_ARCH_HAS_HCD=y >> CONFIG_USB_ARCH_HAS_OHCI=y >> CONFIG_USB_ARCH_HAS_EHCI=y >> -CONFIG_USB=y >> +CONFIG_USB=m >> CONFIG_USB_DEBUG=y >> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y >> >> @@ -1520,7 +1528,7 @@ CONFIG_USB_SUSPEND=y >> CONFIG_USB_OTG=y >> # CONFIG_USB_OTG_WHITELIST is not set >> # CONFIG_USB_OTG_BLACKLIST_HUB is not set >> -CONFIG_USB_MON=y >> +CONFIG_USB_MON=m >> # CONFIG_USB_WUSB is not set >> # CONFIG_USB_WUSB_CBAF is not set >> >> @@ -1537,7 +1545,7 @@ CONFIG_USB_MON=y >> # CONFIG_USB_SL811_HCD is not set >> # CONFIG_USB_R8A66597_HCD is not set >> # CONFIG_USB_HWA_HCD is not set >> -CONFIG_USB_MUSB_HDRC=y >> +CONFIG_USB_MUSB_HDRC=m >> CONFIG_USB_MUSB_SOC=y >> >> # >> @@ -1558,7 +1566,7 @@ CONFIG_USB_MUSB_DEBUG=y >> # >> # CONFIG_USB_ACM is not set >> # CONFIG_USB_PRINTER is not set >> -CONFIG_USB_WDM=y >> +CONFIG_USB_WDM=m >> # CONFIG_USB_TMC is not set >> >> # >> @@ -1568,7 +1576,7 @@ CONFIG_USB_WDM=y >> # >> # also be needed; see USB_STORAGE Help for more info >> # >> -CONFIG_USB_STORAGE=y >> +CONFIG_USB_STORAGE=m >> # CONFIG_USB_STORAGE_DEBUG is not set >> # CONFIG_USB_STORAGE_DATAFAB is not set >> # CONFIG_USB_STORAGE_FREECOM is not set >> @@ -1615,10 +1623,10 @@ CONFIG_USB_LIBUSUAL=y >> # CONFIG_USB_LD is not set >> # CONFIG_USB_TRANCEVIBRATOR is not set >> # CONFIG_USB_IOWARRIOR is not set >> -CONFIG_USB_TEST=y >> +CONFIG_USB_TEST=m >> # CONFIG_USB_ISIGHTFW is not set >> # CONFIG_USB_VST is not set >> -CONFIG_USB_GADGET=y >> +CONFIG_USB_GADGET=m >> CONFIG_USB_GADGET_DEBUG=y >> CONFIG_USB_GADGET_DEBUG_FILES=y >> CONFIG_USB_GADGET_DEBUG_FS=y >> @@ -1664,8 +1672,8 @@ CONFIG_USB_OTG_UTILS=y >> # CONFIG_USB_GPIO_VBUS is not set >> # CONFIG_ISP1301_OMAP is not set >> # CONFIG_USB_ULPI is not set >> -CONFIG_TWL4030_USB=y >> -CONFIG_NOP_USB_XCEIV=y >> +CONFIG_TWL4030_USB=m >> +CONFIG_NOP_USB_XCEIV=m >> CONFIG_MMC=y >> # CONFIG_MMC_DEBUG is not set >> CONFIG_MMC_UNSAFE_RESUME=y >> @@ -1673,9 +1681,9 @@ CONFIG_MMC_UNSAFE_RESUME=y >> # >> # MMC/SD/SDIO Card Drivers >> # >> -CONFIG_MMC_BLOCK=y >> +CONFIG_MMC_BLOCK=m >> CONFIG_MMC_BLOCK_BOUNCE=y >> -CONFIG_SDIO_UART=y >> +CONFIG_SDIO_UART=m >> # CONFIG_MMC_TEST is not set >> >> # >> @@ -1683,7 +1691,7 @@ CONFIG_SDIO_UART=y >> # >> # CONFIG_MMC_SDHCI is not set >> # CONFIG_MMC_OMAP is not set >> -CONFIG_MMC_OMAP_HS=y >> +CONFIG_MMC_OMAP_HS=m >> # CONFIG_MMC_AT91 is not set >> # CONFIG_MMC_ATMELMCI is not set >> # CONFIG_MMC_SPI is not set >> @@ -1719,10 +1727,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y >> # >> # CONFIG_ACCESSIBILITY is not set >> CONFIG_RTC_LIB=y >> -CONFIG_RTC_CLASS=y >> -CONFIG_RTC_HCTOSYS=y >> -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" >> -# CONFIG_RTC_DEBUG is not set >> +CONFIG_RTC_CLASS=m >> >> # >> # RTC interfaces >> @@ -1747,7 +1752,7 @@ CONFIG_RTC_INTF_DEV=y >> # CONFIG_RTC_DRV_PCF8583 is not set >> # CONFIG_RTC_DRV_M41T80 is not set >> # CONFIG_RTC_DRV_BQ32K is not set >> -CONFIG_RTC_DRV_TWL4030=y >> +CONFIG_RTC_DRV_TWL4030=m >> # CONFIG_RTC_DRV_S35390A is not set >> # CONFIG_RTC_DRV_FM3130 is not set >> # CONFIG_RTC_DRV_RX8581 is not set >> @@ -1795,6 +1800,11 @@ CONFIG_RTC_DRV_TWL4030=y >> # CONFIG_STAGING is not set >> >> # >> +# CBUS support >> +# >> +# CONFIG_CBUS is not set >> + >> +# >> # File systems >> # >> CONFIG_EXT2_FS=y >> @@ -2012,8 +2022,8 @@ CONFIG_SCHED_DEBUG=y >> CONFIG_SCHEDSTATS=y >> CONFIG_TIMER_STATS=y >> # CONFIG_DEBUG_OBJECTS is not set >> -# CONFIG_DEBUG_SLAB is not set >> # CONFIG_DEBUG_KMEMLEAK is not set >> +CONFIG_DEBUG_PREEMPT=y >> # CONFIG_DEBUG_RT_MUTEXES is not set >> # CONFIG_RT_MUTEX_TESTER is not set >> CONFIG_DEBUG_SPINLOCK=y >> @@ -2040,11 +2050,9 @@ CONFIG_DEBUG_INFO=y >> # CONFIG_BOOT_PRINTK_DELAY is not set >> # CONFIG_RCU_TORTURE_TEST is not set >> # CONFIG_RCU_CPU_STALL_DETECTOR is not set >> -# CONFIG_KPROBES_SANITY_TEST is not set >> # CONFIG_BACKTRACE_SELF_TEST is not set >> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set >> # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set >> -# CONFIG_LKDTM is not set >> # CONFIG_FAULT_INJECTION is not set >> # CONFIG_LATENCYTOP is not set >> # CONFIG_SYSCTL_SYSCALL_CHECK is not set >> @@ -2060,6 +2068,7 @@ CONFIG_TRACING_SUPPORT=y >> CONFIG_FTRACE=y >> # CONFIG_FUNCTION_TRACER is not set >> # CONFIG_IRQSOFF_TRACER is not set >> +# CONFIG_PREEMPT_TRACER is not set >> # CONFIG_SCHED_TRACER is not set >> # CONFIG_ENABLE_DEFAULT_TRACERS is not set >> # CONFIG_BOOT_TRACER is not set >> -- >> 1.6.6 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- > Regards, > Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
