> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Kevin Hilman > Sent: Friday, January 29, 2010 6:27 PM > To: linux-omap@xxxxxxxxxxxxxxx > Subject: [PATCH] OMAP2/3: update default defconfig, towards smaller kernel > > Update omap3_defconfig to work towards a minimal kernel by building > most things as modules. Some drivers that cannot currently be built > as modules and need to be fixed: > > - MMC: platform code uses MMC core regulator functions directly The below series posted to LO by Adrian fixes this issue. The core regulator calls are moved into the controller driver. [PATCH V2 0/10] omap_hsmmc changes V2 Regards, Madhu > - ASoC: drivers call omap_ctrl_[read|write] directly > > In addition some additional changes: > > - use new SLUB allocator instead of SLAB (increased debugability) > - compile with PREEMPT enabled by default > - disable OABI_COMPAT. We should not pretend to support this IMHO > - disable CPUfreq: not yet supported in mainline > - disable PM_DEBUG_VERBOSE > - enable fb/DSS2 as modules > - disable Kprobes > > zImage size comparison > before: 3160272 > after: 2610108 > > Some ideas for reducing this further: > - fix MMC and ASoC, then build those as modules > - disable all the kernel debug features > - convert MTD and all flash fs to modules > > Then, we should have platform specific initramfs configs so rootfs > from flash, MMC, etc. could be done using modules in initramfs. > > Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > --- > arch/arm/configs/omap3_defconfig | 215 ++++++++++++++++++++------------- > ----- > 1 files changed, 112 insertions(+), 103 deletions(-) > > diff --git a/arch/arm/configs/omap3_defconfig > b/arch/arm/configs/omap3_defconfig > index 2bc80d7..247f191 100644 > --- a/arch/arm/configs/omap3_defconfig > +++ b/arch/arm/configs/omap3_defconfig > @@ -1,7 +1,7 @@ > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.33-rc5 > -# Tue Jan 26 11:05:31 2010 > +# Fri Jan 29 16:02:40 2010 > # > CONFIG_ARM=y > CONFIG_SYS_SUPPORTS_APM_EMULATION=y > @@ -32,6 +32,7 @@ CONFIG_CONSTRUCTORS=y > # > CONFIG_EXPERIMENTAL=y > CONFIG_BROKEN_ON_SMP=y > +CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > @@ -105,16 +106,16 @@ CONFIG_AIO=y > # Kernel Performance Events And Counters > # > CONFIG_VM_EVENT_COUNTERS=y > +# CONFIG_SLUB_DEBUG is not set > CONFIG_COMPAT_BRK=y > -CONFIG_SLAB=y > -# CONFIG_SLUB is not set > +# CONFIG_SLAB is not set > +CONFIG_SLUB=y > # CONFIG_SLOB is not set > CONFIG_PROFILING=y > CONFIG_TRACEPOINTS=y > -CONFIG_OPROFILE=y > +CONFIG_OPROFILE=m > CONFIG_HAVE_OPROFILE=y > -CONFIG_KPROBES=y > -CONFIG_KRETPROBES=y > +# CONFIG_KPROBES is not set > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_HAVE_CLK=y > @@ -125,7 +126,6 @@ CONFIG_HAVE_CLK=y > # CONFIG_GCOV_KERNEL is not set > # CONFIG_SLOW_WORK is not set > CONFIG_HAVE_GENERIC_DMA_COHERENT=y > -CONFIG_SLABINFO=y > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > @@ -251,7 +251,7 @@ CONFIG_OMAP_MUX=y > CONFIG_OMAP_MUX_DEBUG=y > CONFIG_OMAP_MUX_WARNINGS=y > CONFIG_OMAP_MCBSP=y > -# CONFIG_OMAP_MBOX_FWK is not set > +CONFIG_OMAP_MBOX_FWK=m > # CONFIG_OMAP_MPU_TIMER is not set > CONFIG_OMAP_32K_TIMER=y > CONFIG_OMAP_32K_TIMER_HZ=128 > @@ -354,13 +354,14 @@ CONFIG_VMSPLIT_3G=y > # CONFIG_VMSPLIT_2G is not set > # CONFIG_VMSPLIT_1G is not set > CONFIG_PAGE_OFFSET=0xC0000000 > -CONFIG_PREEMPT_NONE=y > +# CONFIG_PREEMPT_NONE is not set > # CONFIG_PREEMPT_VOLUNTARY is not set > -# CONFIG_PREEMPT is not set > +CONFIG_PREEMPT=y > CONFIG_HZ=128 > # CONFIG_THUMB2_KERNEL is not set > CONFIG_AEABI=y > -CONFIG_OABI_COMPAT=y > +# CONFIG_OABI_COMPAT is not set > +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y > # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set > # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set > # CONFIG_HIGHMEM is not set > @@ -394,21 +395,12 @@ CONFIG_ATAGS_PROC=y > # > # CPU Power Management > # > -CONFIG_CPU_FREQ=y > -CONFIG_CPU_FREQ_TABLE=y > -# CONFIG_CPU_FREQ_DEBUG is not set > -CONFIG_CPU_FREQ_STAT=y > -CONFIG_CPU_FREQ_STAT_DETAILS=y > -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > +# CONFIG_CPU_FREQ is not set > +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set > -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set > -CONFIG_CPU_FREQ_GOV_USERSPACE=y > -CONFIG_CPU_FREQ_GOV_ONDEMAND=y > -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set > # CONFIG_CPU_IDLE is not set > > # > @@ -439,11 +431,10 @@ CONFIG_BINFMT_MISC=y > # > CONFIG_PM=y > CONFIG_PM_DEBUG=y > -CONFIG_PM_VERBOSE=y > +# CONFIG_PM_VERBOSE is not set > CONFIG_CAN_PM_TRACE=y > CONFIG_PM_SLEEP=y > CONFIG_SUSPEND=y > -# CONFIG_PM_TEST_SUSPEND is not set > CONFIG_SUSPEND_FREEZER=y > # CONFIG_APM_EMULATION is not set > # CONFIG_PM_RUNTIME is not set > @@ -539,32 +530,31 @@ CONFIG_NETFILTER_ADVANCED=y > # Network testing > # > # CONFIG_NET_PKTGEN is not set > -# CONFIG_NET_TCPPROBE is not set > # CONFIG_NET_DROP_MONITOR is not set > # CONFIG_HAMRADIO is not set > # CONFIG_CAN is not set > # CONFIG_IRDA is not set > -CONFIG_BT=y > -CONFIG_BT_L2CAP=y > -CONFIG_BT_SCO=y > -CONFIG_BT_RFCOMM=y > +CONFIG_BT=m > +CONFIG_BT_L2CAP=m > +CONFIG_BT_SCO=m > +CONFIG_BT_RFCOMM=m > CONFIG_BT_RFCOMM_TTY=y > -CONFIG_BT_BNEP=y > +CONFIG_BT_BNEP=m > CONFIG_BT_BNEP_MC_FILTER=y > CONFIG_BT_BNEP_PROTO_FILTER=y > -CONFIG_BT_HIDP=y > +CONFIG_BT_HIDP=m > > # > # Bluetooth device drivers > # > # CONFIG_BT_HCIBTUSB is not set > # CONFIG_BT_HCIBTSDIO is not set > -CONFIG_BT_HCIUART=y > +CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > CONFIG_BT_HCIUART_LL=y > -CONFIG_BT_HCIBCM203X=y > -CONFIG_BT_HCIBPA10X=y > +CONFIG_BT_HCIBCM203X=m > +CONFIG_BT_HCIBPA10X=m > # CONFIG_BT_HCIBFUSB is not set > # CONFIG_BT_HCIVHCI is not set > # CONFIG_BT_MRVL is not set > @@ -672,7 +662,6 @@ CONFIG_MTD_CFI_UTIL=y > # CONFIG_MTD_COMPLEX_MAPPINGS is not set > # CONFIG_MTD_PHYSMAP is not set > # CONFIG_MTD_ARM_INTEGRATOR is not set > -CONFIG_MTD_OMAP_NOR=y > # CONFIG_MTD_PLATRAM is not set > > # > @@ -770,7 +759,7 @@ CONFIG_HAVE_IDE=y > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > -CONFIG_SCSI=y > +CONFIG_SCSI=m > CONFIG_SCSI_DMA=y > # CONFIG_SCSI_TGT is not set > # CONFIG_SCSI_NETLINK is not set > @@ -779,7 +768,7 @@ CONFIG_SCSI_PROC_FS=y > # > # SCSI support type (disk, tape, CD-ROM) > # > -CONFIG_BLK_DEV_SD=y > +CONFIG_BLK_DEV_SD=m > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > @@ -844,7 +833,7 @@ CONFIG_SMC91X=y > # CONFIG_DM9000 is not set > # CONFIG_ENC28J60 is not set > # CONFIG_ETHOC is not set > -# CONFIG_SMC911X is not set > +CONFIG_SMC911X=y > CONFIG_SMSC911X=y > # CONFIG_DNET is not set > # CONFIG_IBM_NEW_EMAC_ZMII is not set > @@ -872,9 +861,9 @@ CONFIG_WLAN=y > # CONFIG_B43LEGACY is not set > # CONFIG_HOSTAP is not set > # CONFIG_IWM is not set > -CONFIG_LIBERTAS=y > -CONFIG_LIBERTAS_USB=y > -CONFIG_LIBERTAS_SDIO=y > +CONFIG_LIBERTAS=m > +CONFIG_LIBERTAS_USB=m > +CONFIG_LIBERTAS_SDIO=m > # CONFIG_LIBERTAS_SPI is not set > CONFIG_LIBERTAS_DEBUG=y > # CONFIG_P54_COMMON is not set > @@ -893,25 +882,25 @@ CONFIG_LIBERTAS_DEBUG=y > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > -CONFIG_USB_USBNET=y > -CONFIG_USB_NET_AX8817X=y > -CONFIG_USB_NET_CDCETHER=y > +CONFIG_USB_USBNET=m > +CONFIG_USB_NET_AX8817X=m > +CONFIG_USB_NET_CDCETHER=m > # CONFIG_USB_NET_CDC_EEM is not set > # CONFIG_USB_NET_DM9601 is not set > # CONFIG_USB_NET_SMSC95XX is not set > # CONFIG_USB_NET_GL620A is not set > -CONFIG_USB_NET_NET1080=y > +CONFIG_USB_NET_NET1080=m > # CONFIG_USB_NET_PLUSB is not set > # CONFIG_USB_NET_MCS7830 is not set > # CONFIG_USB_NET_RNDIS_HOST is not set > -CONFIG_USB_NET_CDC_SUBSET=y > +CONFIG_USB_NET_CDC_SUBSET=m > CONFIG_USB_ALI_M5632=y > CONFIG_USB_AN2720=y > CONFIG_USB_BELKIN=y > CONFIG_USB_ARMLINUX=y > CONFIG_USB_EPSON2888=y > CONFIG_USB_KC2190=y > -CONFIG_USB_NET_ZAURUS=y > +CONFIG_USB_NET_ZAURUS=m > # CONFIG_USB_NET_INT51X1 is not set > # CONFIG_WAN is not set > # CONFIG_PPP is not set > @@ -933,11 +922,11 @@ CONFIG_INPUT=y > # > # Userland interfaces > # > -CONFIG_INPUT_MOUSEDEV=y > +CONFIG_INPUT_MOUSEDEV=m > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > -CONFIG_INPUT_JOYDEV=y > +CONFIG_INPUT_JOYDEV=m > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > @@ -961,7 +950,7 @@ CONFIG_KEYBOARD_GPIO=y > CONFIG_KEYBOARD_TWL4030=y > # CONFIG_KEYBOARD_XTKBD is not set > CONFIG_INPUT_MOUSE=y > -CONFIG_MOUSE_PS2=y > +CONFIG_MOUSE_PS2=m > CONFIG_MOUSE_PS2_ALPS=y > CONFIG_MOUSE_PS2_LOGIPS2PP=y > CONFIG_MOUSE_PS2_SYNAPTICS=y > @@ -978,7 +967,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TABLET is not set > CONFIG_INPUT_TOUCHSCREEN=y > -CONFIG_TOUCHSCREEN_ADS7846=y > +CONFIG_TOUCHSCREEN_ADS7846=m > # CONFIG_TOUCHSCREEN_AD7877 is not set > # CONFIG_TOUCHSCREEN_AD7879_I2C is not set > # CONFIG_TOUCHSCREEN_AD7879_SPI is not set > @@ -1037,7 +1026,7 @@ CONFIG_DEVKMEM=y > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > -CONFIG_SERIAL_8250_NR_UARTS=32 > +CONFIG_SERIAL_8250_NR_UARTS=4 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > CONFIG_SERIAL_8250_MANY_PORTS=y > @@ -1055,9 +1044,9 @@ CONFIG_UNIX98_PTYS=y > # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set > # CONFIG_LEGACY_PTYS is not set > # CONFIG_IPMI_HANDLER is not set > -CONFIG_HW_RANDOM=y > +CONFIG_HW_RANDOM=m > # CONFIG_HW_RANDOM_TIMERIOMEM is not set > -CONFIG_HW_RANDOM_OMAP=y > +CONFIG_HW_RANDOM_OMAP=m > # CONFIG_R3964 is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_TCG_TPM is not set > @@ -1110,7 +1099,7 @@ CONFIG_SPI_MASTER=y > # > # CONFIG_SPI_BITBANG is not set > # CONFIG_SPI_GPIO is not set > -CONFIG_SPI_OMAP24XX=y > +CONFIG_SPI_OMAP24XX=m > # CONFIG_SPI_XILINX is not set > # CONFIG_SPI_DESIGNWARE is not set > > @@ -1156,7 +1145,7 @@ CONFIG_GPIO_TWL4030=y > # > # AC97 GPIO expanders: > # > -CONFIG_W1=y > +CONFIG_W1=m > CONFIG_W1_CON=y > > # > @@ -1177,14 +1166,14 @@ CONFIG_W1_CON=y > # CONFIG_W1_SLAVE_DS2433 is not set > # CONFIG_W1_SLAVE_DS2760 is not set > # CONFIG_W1_SLAVE_BQ27000 is not set > -CONFIG_POWER_SUPPLY=y > +CONFIG_POWER_SUPPLY=m > # CONFIG_POWER_SUPPLY_DEBUG is not set > # CONFIG_PDA_POWER is not set > # CONFIG_BATTERY_DS2760 is not set > # CONFIG_BATTERY_DS2782 is not set > # CONFIG_BATTERY_BQ27x00 is not set > # CONFIG_BATTERY_MAX17040 is not set > -CONFIG_HWMON=y > +CONFIG_HWMON=m > # CONFIG_HWMON_VID is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > @@ -1264,8 +1253,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y > # Watchdog Device Drivers > # > # CONFIG_SOFT_WATCHDOG is not set > -CONFIG_OMAP_WATCHDOG=y > -CONFIG_TWL4030_WATCHDOG=y > +CONFIG_OMAP_WATCHDOG=m > +CONFIG_TWL4030_WATCHDOG=m > > # > # USB-based Watchdog Cards > @@ -1289,7 +1278,7 @@ CONFIG_MFD_CORE=y > # CONFIG_TPS65010 is not set > # CONFIG_MENELAUS is not set > CONFIG_TWL4030_CORE=y > -# CONFIG_TWL4030_POWER is not set > +CONFIG_TWL4030_POWER=y > CONFIG_TWL4030_CODEC=y > # CONFIG_MFD_TMIO is not set > # CONFIG_MFD_T7L66XB is not set > @@ -1325,13 +1314,13 @@ CONFIG_REGULATOR_TWL4030=y > # > # CONFIG_VGASTATE is not set > # CONFIG_VIDEO_OUTPUT_CONTROL is not set > -CONFIG_FB=y > +CONFIG_FB=m > CONFIG_FIRMWARE_EDID=y > # CONFIG_FB_DDC is not set > # CONFIG_FB_BOOT_VESA_SUPPORT is not set > -CONFIG_FB_CFB_FILLRECT=y > -CONFIG_FB_CFB_COPYAREA=y > -CONFIG_FB_CFB_IMAGEBLIT=y > +CONFIG_FB_CFB_FILLRECT=m > +CONFIG_FB_CFB_COPYAREA=m > +CONFIG_FB_CFB_IMAGEBLIT=m > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set > # CONFIG_FB_SYS_FILLRECT is not set > # CONFIG_FB_SYS_COPYAREA is not set > @@ -1354,25 +1343,38 @@ CONFIG_FB_TILEBLITTING=y > # CONFIG_FB_METRONOME is not set > # CONFIG_FB_MB862XX is not set > # CONFIG_FB_BROADSHEET is not set > -CONFIG_FB_OMAP=y > CONFIG_FB_OMAP_LCD_VGA=y > -# CONFIG_FB_OMAP_031M3R is not set > -# CONFIG_FB_OMAP_048M3R is not set > -CONFIG_FB_OMAP_079M3R=y > -# CONFIG_FB_OMAP_092M9R is not set > -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set > -# CONFIG_FB_OMAP_LCD_MIPID is not set > # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set > -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 > -# CONFIG_OMAP2_DSS is not set > +CONFIG_OMAP2_VRAM=y > +CONFIG_OMAP2_VRFB=y > +CONFIG_OMAP2_DSS=m > +CONFIG_OMAP2_VRAM_SIZE=4 > +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y > +# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set > +# CONFIG_OMAP2_DSS_RFBI is not set > +CONFIG_OMAP2_DSS_VENC=y > +# CONFIG_OMAP2_DSS_SDI is not set > +# CONFIG_OMAP2_DSS_DSI is not set > +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set > +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 > +CONFIG_FB_OMAP2=m > +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y > +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set > +CONFIG_FB_OMAP2_NUM_FBS=3 > + > +# > +# OMAP2/3 Display Device Drivers > +# > +CONFIG_PANEL_GENERIC=m > +CONFIG_PANEL_SHARP_LS037V7DW01=m > CONFIG_BACKLIGHT_LCD_SUPPORT=y > -CONFIG_LCD_CLASS_DEVICE=y > +CONFIG_LCD_CLASS_DEVICE=m > # CONFIG_LCD_LMS283GF05 is not set > # CONFIG_LCD_LTV350QV is not set > # CONFIG_LCD_ILI9320 is not set > # CONFIG_LCD_TDO24M is not set > # CONFIG_LCD_VGG2432A4 is not set > -CONFIG_LCD_PLATFORM=y > +CONFIG_LCD_PLATFORM=m > CONFIG_BACKLIGHT_CLASS_DEVICE=y > CONFIG_BACKLIGHT_GENERIC=y > > @@ -1390,7 +1392,7 @@ CONFIG_DISPLAY_SUPPORT=y > # > # CONFIG_VGA_CONSOLE is not set > CONFIG_DUMMY_CONSOLE=y > -CONFIG_FRAMEBUFFER_CONSOLE=y > +CONFIG_FRAMEBUFFER_CONSOLE=m > # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > CONFIG_FONTS=y > @@ -1414,13 +1416,13 @@ CONFIG_SOUND_OSS_CORE_PRECLAIM=y > CONFIG_SND=y > CONFIG_SND_TIMER=y > CONFIG_SND_PCM=y > -CONFIG_SND_HWDEP=y > -CONFIG_SND_RAWMIDI=y > +CONFIG_SND_HWDEP=m > +CONFIG_SND_RAWMIDI=m > CONFIG_SND_JACK=y > # CONFIG_SND_SEQUENCER is not set > CONFIG_SND_OSSEMUL=y > -CONFIG_SND_MIXER_OSS=y > -CONFIG_SND_PCM_OSS=y > +CONFIG_SND_MIXER_OSS=m > +CONFIG_SND_PCM_OSS=m > CONFIG_SND_PCM_OSS_PLUGINS=y > # CONFIG_SND_HRTIMER is not set > # CONFIG_SND_DYNAMIC_MINORS is not set > @@ -1443,7 +1445,7 @@ CONFIG_SND_DRIVERS=y > CONFIG_SND_ARM=y > CONFIG_SND_SPI=y > CONFIG_SND_USB=y > -CONFIG_SND_USB_AUDIO=y > +CONFIG_SND_USB_AUDIO=m > # CONFIG_SND_USB_CAIAQ is not set > CONFIG_SND_SOC=y > CONFIG_SND_OMAP_SOC=y > @@ -1468,11 +1470,17 @@ CONFIG_HID=y > # > # USB Input Devices > # > -CONFIG_USB_HID=y > +CONFIG_USB_HID=m > # CONFIG_HID_PID is not set > # CONFIG_USB_HIDDEV is not set > > # > +# USB HID Boot Protocol drivers > +# > +# CONFIG_USB_KBD is not set > +# CONFIG_USB_MOUSE is not set > + > +# > # Special HID drivers > # > # CONFIG_HID_A4TECH is not set > @@ -1506,7 +1514,7 @@ CONFIG_USB_SUPPORT=y > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > -CONFIG_USB=y > +CONFIG_USB=m > CONFIG_USB_DEBUG=y > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > > @@ -1520,7 +1528,7 @@ CONFIG_USB_SUSPEND=y > CONFIG_USB_OTG=y > # CONFIG_USB_OTG_WHITELIST is not set > # CONFIG_USB_OTG_BLACKLIST_HUB is not set > -CONFIG_USB_MON=y > +CONFIG_USB_MON=m > # CONFIG_USB_WUSB is not set > # CONFIG_USB_WUSB_CBAF is not set > > @@ -1537,7 +1545,7 @@ CONFIG_USB_MON=y > # CONFIG_USB_SL811_HCD is not set > # CONFIG_USB_R8A66597_HCD is not set > # CONFIG_USB_HWA_HCD is not set > -CONFIG_USB_MUSB_HDRC=y > +CONFIG_USB_MUSB_HDRC=m > CONFIG_USB_MUSB_SOC=y > > # > @@ -1558,7 +1566,7 @@ CONFIG_USB_MUSB_DEBUG=y > # > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > -CONFIG_USB_WDM=y > +CONFIG_USB_WDM=m > # CONFIG_USB_TMC is not set > > # > @@ -1568,7 +1576,7 @@ CONFIG_USB_WDM=y > # > # also be needed; see USB_STORAGE Help for more info > # > -CONFIG_USB_STORAGE=y > +CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > @@ -1615,10 +1623,10 @@ CONFIG_USB_LIBUSUAL=y > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > # CONFIG_USB_IOWARRIOR is not set > -CONFIG_USB_TEST=y > +CONFIG_USB_TEST=m > # CONFIG_USB_ISIGHTFW is not set > # CONFIG_USB_VST is not set > -CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET=m > CONFIG_USB_GADGET_DEBUG=y > CONFIG_USB_GADGET_DEBUG_FILES=y > CONFIG_USB_GADGET_DEBUG_FS=y > @@ -1664,8 +1672,8 @@ CONFIG_USB_OTG_UTILS=y > # CONFIG_USB_GPIO_VBUS is not set > # CONFIG_ISP1301_OMAP is not set > # CONFIG_USB_ULPI is not set > -CONFIG_TWL4030_USB=y > -CONFIG_NOP_USB_XCEIV=y > +CONFIG_TWL4030_USB=m > +CONFIG_NOP_USB_XCEIV=m > CONFIG_MMC=y > # CONFIG_MMC_DEBUG is not set > CONFIG_MMC_UNSAFE_RESUME=y > @@ -1673,9 +1681,9 @@ CONFIG_MMC_UNSAFE_RESUME=y > # > # MMC/SD/SDIO Card Drivers > # > -CONFIG_MMC_BLOCK=y > +CONFIG_MMC_BLOCK=m > CONFIG_MMC_BLOCK_BOUNCE=y > -CONFIG_SDIO_UART=y > +CONFIG_SDIO_UART=m > # CONFIG_MMC_TEST is not set > > # > @@ -1683,7 +1691,7 @@ CONFIG_SDIO_UART=y > # > # CONFIG_MMC_SDHCI is not set > # CONFIG_MMC_OMAP is not set > -CONFIG_MMC_OMAP_HS=y > +CONFIG_MMC_OMAP_HS=m > # CONFIG_MMC_AT91 is not set > # CONFIG_MMC_ATMELMCI is not set > # CONFIG_MMC_SPI is not set > @@ -1719,10 +1727,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y > # > # CONFIG_ACCESSIBILITY is not set > CONFIG_RTC_LIB=y > -CONFIG_RTC_CLASS=y > -CONFIG_RTC_HCTOSYS=y > -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > -# CONFIG_RTC_DEBUG is not set > +CONFIG_RTC_CLASS=m > > # > # RTC interfaces > @@ -1747,7 +1752,7 @@ CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_DRV_PCF8583 is not set > # CONFIG_RTC_DRV_M41T80 is not set > # CONFIG_RTC_DRV_BQ32K is not set > -CONFIG_RTC_DRV_TWL4030=y > +CONFIG_RTC_DRV_TWL4030=m > # CONFIG_RTC_DRV_S35390A is not set > # CONFIG_RTC_DRV_FM3130 is not set > # CONFIG_RTC_DRV_RX8581 is not set > @@ -1795,6 +1800,11 @@ CONFIG_RTC_DRV_TWL4030=y > # CONFIG_STAGING is not set > > # > +# CBUS support > +# > +# CONFIG_CBUS is not set > + > +# > # File systems > # > CONFIG_EXT2_FS=y > @@ -2012,8 +2022,8 @@ CONFIG_SCHED_DEBUG=y > CONFIG_SCHEDSTATS=y > CONFIG_TIMER_STATS=y > # CONFIG_DEBUG_OBJECTS is not set > -# CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_KMEMLEAK is not set > +CONFIG_DEBUG_PREEMPT=y > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_RT_MUTEX_TESTER is not set > CONFIG_DEBUG_SPINLOCK=y > @@ -2040,11 +2050,9 @@ CONFIG_DEBUG_INFO=y > # CONFIG_BOOT_PRINTK_DELAY is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_RCU_CPU_STALL_DETECTOR is not set > -# CONFIG_KPROBES_SANITY_TEST is not set > # CONFIG_BACKTRACE_SELF_TEST is not set > # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set > -# CONFIG_LKDTM is not set > # CONFIG_FAULT_INJECTION is not set > # CONFIG_LATENCYTOP is not set > # CONFIG_SYSCTL_SYSCALL_CHECK is not set > @@ -2060,6 +2068,7 @@ CONFIG_TRACING_SUPPORT=y > CONFIG_FTRACE=y > # CONFIG_FUNCTION_TRACER is not set > # CONFIG_IRQSOFF_TRACER is not set > +# CONFIG_PREEMPT_TRACER is not set > # CONFIG_SCHED_TRACER is not set > # CONFIG_ENABLE_DEFAULT_TRACERS is not set > # CONFIG_BOOT_TRACER is not set > -- > 1.6.6 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
