Hi, On Thu, Dec 17, 2009 at 08:01:15PM +0100, ext Bill Gatliff wrote:
I'm working on an OMAP3530CUS board that uses an ISP1505 USB PHY, and I haven't gotten much luck getting the kernel to recognize any USB devices. No luck, actually. :) My oscilloscope and the schematic say that the hardware is wired up properly, I'm just wondering if anyone has a similar configuration that's working for them--- and which kernel they are using? The only thing I'm a little concerned about is the possibility that the "nop" transceiver isn't the right one for the ISP1505. I have seen patches floating around that claim to support the ISP1504, which should be compatible with the 1505 if the datasheet is to be believed; but those patches were in the context of i.MX3x machines, and they also depended on a "slim framework for external transceivers" patch that AFAICT hasn't been merged anywhere despite having been posted back in June. Said patches can be found here: http://kerneltrap.org/mailarchive/linux-usb/2009/6/10/5909543 Anyone have any ideas on how to pursue this, before I start chasing a solution down myself?
is this with musb ? if it's musb, you need the nop transceiver. Do you have any boot logs which you could share ? Without information on the board, is a bit difficult :-(
-- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html