> -----Original Message----- > From: Pandita, Vikram > Sent: Wednesday, October 28, 2009 7:14 PM > To: Pais, Allen; Menon, Nishanth; linux-omap@xxxxxxxxxxxxxxx > Subject: RE: [PATCH 1/2] Added board-3630.c file. > > > > >-----Original Message----- > >From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Pais, > >Sent: Monday, October 26, 2009 4:40 PM > >To: Pais, Allen; linux-omap@xxxxxxxxxxxxxxx > >Subject: RE: [PATCH 1/2] Added board-3630.c file. > > >> Signed-off-by: Allen Pais <allen.pais@xxxxxx> > >> --- > >> arch/arm/mach-omap2/board-3630sdp.c | 188 > >> +++++++++++++++++++++++++++++++++++ > >> 1 files changed, 188 insertions(+), 0 deletions(-) create mode > >> 100644 arch/arm/mach-omap2/board-3630sdp.c > >> > >> diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach- > >> omap2/board-3630sdp.c new file mode 100644 index 0000000..d3ddbd1 > >> --- /dev/null > >> +++ b/arch/arm/mach-omap2/board-3630sdp.c > >> @@ -0,0 +1,188 @@ > >> +/* > >> + > > > >NAK. Could we follow the same issue with zoom2 -> break the keypad into a > Separate one and use it > >instead? Same for all reused zoom2 components.. > > > >[Allen] Yes, we should do that. Not only for keypad but also > >For display panel and touch screen so that sdp3630, zoom3 and > >Zoom2 could use the same code, without having to duplicate > >Code. > > We just got the same image for zoom3 boot on SDP3630 (after mach-type > change) > The peripheral set is almost >90% same: same keypad, same display, same > RAM, same NAND. Ok zoom2,zoom3,sdp3630 -> might be good to compare. Here is a quick attempt: Peripheral zoom2 zoom3 sdp3630 NAND A B B SDRAM A B B Keypad A A A Camera A A A LCD Display A A A Power A A A HDMI A A ?? Audio A A ?? Voltage resources?? LEDs A A A OPPs A B B .... others?? ... NOTE: I am just using A and B to show the types of devices. So the files registering the same type would probably be shared.. could you expand this list? > > I see a good amount of re-use possible here. > Here is how we could do it: > > Board-zoom2.c > Split into: > Board-zoom2.c > Board-zoom-peripheral.c [reuse] > > 3630 zoom3 uses: > Board-zoom3.c > Board-zoom-peripheral.c [reuse] > > 3630 SDP uses: > Board-3630sdp.c > Board-zoom-peripheral.c [reuse] > > > Will give a first pass at this split up and post patches. > Thanks.. Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
