On 6/19/24 12:15, Thomas Richard wrote: > This adds suspend to ram support for the PCIe (RC mode) on J7200 platform. > > In this 7th iteration, the i2c and mux patches were moved to dedicated > series ([1] and [2]). > The patch for the gpio-pca953x driver was removed. It will be sent > separately for further testing and discussion. > > No merge conflict with 6.10-rc4. > > [1]: https://lore.kernel.org/all/20240613-i2c-omap-wakeup-controller-during-suspend-v1-0-aab001eb1ad1@xxxxxxxxxxx/ > [2]: https://lore.kernel.org/all/20240613-mux-mmio-resume-support-v1-0-4525bf56024a@xxxxxxxxxxx/ Hello !! This series has no remaining comment to address. Is there any chance to get this series merged ? Best Regards, Thomas > > Regards, > > Thomas > > Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx> > --- > Changes in v7: > - all: series rebased on Linux 6.10-rc4. > - i2c: patches moved to a dedicated series. > - mux: patches moved to a dedicated series. > - gpio-pca953x: patch removed, will be sent separately. > - Link to v6: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v6-0-4656ef6e6d66@xxxxxxxxxxx > > Changes in v6: > - i2c-omap: add a patch to remove __maybe_unused attribute of > omap_i2c_runtime_suspend() and omap_i2c_runtime_resume() > - i2c-omap: fix compile issue if CONFIG_PM_SLEEP is not set > - Link to v5: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v5-0-4b8c46711ded@xxxxxxxxxxx > > Changes in v5: > - all: series rebased on Linux 6.9-rc1 > - pinctrl-single: patch removed (already applied to the pinctrl tree) > - phy: patches moved to a dedicated series. > - pci: add T_PERST_CLK_US macro. > - pci-j721e: update the comments about T_PERST_CLK_US. > - Link to v4: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v4-0-6f1f53390c85@xxxxxxxxxxx > > Changes in v4: > - all: use SoB/Co-developed-by for patches initially developed by Théo > Lebrun. > - pinctrl-single: squash the two commits. > - i2c-omap: fix line lenghts of the comment in omap_i2c_suspend(). > - mux: mux_chip_resume() return 0 or at the first error. > - phy-j721e-wiz: clean code around dev_err_probe(). > - phy-j721e-wiz: use REF_CLK_100MHZ macros. > - pci: fix subject line for all PCI patches. > - pci-cadence: use fsleep() instead of usleep_range(). > - pci-cadence: remove cdns_torrent_clk_cleanup() call in > cdns_torrent_phy_resume_noirq(). > - pci-j721e: add a patch to use dev_err_probe() instead of dev_err() in the probe(). > - pci-j721e: fix unordered header files. > - pci-j721e: remove some log spammers. > - pci-j721e: add a missing clock disable in j721e_pcie_resume_noirq(). > - pci-j721e: simplify the patch "Add reset GPIO to struct j721e_pcie" > - Link to v3: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v3-0-5c2e4a3fac1f@xxxxxxxxxxx > > Changes in v3: > - pinctrl-single: split patch in two parts, a first patch to remove the > dead code, a second to move suspend()/resume() callbacks to noirq. > - i2c-omap: add a comments above the suspend_noirq() callback. > - mux: now mux_chip_resume() try to restores all muxes, then return 0 if > all is ok or the first failure. > - mmio: fix commit message. > - phy-j721e-wiz: add a patch to use dev_err_probe() instead of dev_err() in > the wiz_clock_init() function. > - phy-j721e-wiz: remove probe boolean for the wiz_clock_init(), rename the > function to wiz_clock_probe(), extract hardware configuration part in a > new function wiz_clock_init(). > - phy-cadence-torrent: use dev_err_probe() and fix commit messages > - pcie-cadence-host: remove probe boolean for the cdns_pcie_host_setup() > function and extract the link setup part in a new function > cdns_pcie_host_link_setup(). > - pcie-cadence-host: make cdns_pcie_host_init() global. > - pci-j721e: use the cdns_pcie_host_link_setup() cdns_pcie_host_init() > functions in the resume_noirq() callback. > - Link to v2: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v2-0-8e4f7d228ec2@xxxxxxxxxxx > > Changes in v2: > - all: fix commits messages. > - all: use DEFINE_NOIRQ_DEV_PM_OPS and pm_sleep_ptr macros. > - all: remove useless #ifdef CONFIG_PM. > - pinctrl-single: drop dead code > - mux: add mux_chip_resume() function in mux core. > - mmio: resume sequence is now a call to mux_chip_resume(). > - phy-cadence-torrent: fix typo in resume sequence (reset_control_assert() > instead of reset_control_put()). > - phy-cadence-torrent: use PHY instead of phy. > - pci-j721e: do not shadow cdns_pcie_host_setup return code in resume > sequence. > - pci-j721e: drop dead code. > - Link to v1: https://lore.kernel.org/r/20240102-j7200-pcie-s2r-v1-0-84e55da52400@xxxxxxxxxxx > > --- > Thomas Richard (5): > PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup() > PCI: cadence: Set cdns_pcie_host_init() global > PCI: j721e: Use dev_err_probe() in the probe() function > PCI: Add T_PERST_CLK_US macro > PCI: j721e: Use T_PERST_CLK_US macro > > Théo Lebrun (2): > PCI: j721e: Add reset GPIO to struct j721e_pcie > PCI: j721e: Add suspend and resume support > > drivers/pci/controller/cadence/pci-j721e.c | 121 ++++++++++++++++++--- > drivers/pci/controller/cadence/pcie-cadence-host.c | 44 +++++--- > drivers/pci/controller/cadence/pcie-cadence.h | 12 ++ > drivers/pci/pci.h | 3 + > 4 files changed, 146 insertions(+), 34 deletions(-) > --- > base-commit: 7510725e693fb5e4b4cd17086cc5a49a7a065b9c > change-id: 20240102-j7200-pcie-s2r-ecb1a979e357 > > Best regards,
