On Sun, 16 Aug 2009 16:13:38 +0300 Felipe Balbi <me@xxxxxxxxxxxxxxx> wrote: > > > It didn't help. Only way to get the mainline kernel booting is to revert > > > e8e2ff462dd92693f29eb848f42d3eb720390d59 and activate both > > > CONFIG_TWL4030_USB and CONFIG_NOP_USB_XCEIV. > > > > > By some reason CONFIG_OMAP_LL_DEBUG_UART3=y and CONFIG_DEBUG_LL=y > > > don't work in mainline so hard to trace what is make an oops. > > > > > I attached my config if you want look at it. > > > > You config has both CONFIG_TWL4030_USB and CONFIG_NOP_USB_XCEIV enabled. > > Can you try Felipe's patch but enable only CONFIG_TWL4030_USB. > > > > http://marc.info/?l=linux-arm-kernel&m=125007992121335&w=2 > > Oh yeah, good point. > As I told before (lines 4-6 in this mail), Felipe's patch to the board-omap3beagle.c didn't help. Only way to make 2.6.31-rc6 booting was to enable both of those config options + revert. > @Jarkko With the patch I sent you on top of mainline, did you make > omap3_beagle_defconfig again ? > Yep. Actually I re-tested it now with make distclean first. Meaning patch from this mail: http://marc.info/?l=linux-usb&m=125041334606967&w=2 No sign of life. Now reverting the e8e2ff462dd92693f29eb848f42d3eb720390d59 No sign of life. Adding CONFIG_NOP_USB_XCEIV=y Bingo! Getting e8e2ff462dd92693f29eb848f42d3eb720390d59 back Again, no sign of life. -- Jarkko -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
