> Hi > > BeagleBoard stopped booting at 2.6.31-rc6 and it turned out that this > commit broke it: > > commit e8e2ff462dd92693f29eb848f42d3eb720390d59 > Author: Gupta, Ajay Kumar <ajay.gupta@xxxxxx> > Date: Wed Jul 29 11:58:57 2009 +0530 > > USB: musb: fix the nop registration for OMAP3EVM > > While this is easy to fix for the Beagle with a patch below, I don't know > how many other OMAP boards there are which should be fixed as well. > Or would it be better to revert the patch itself for 2.6.31? > > > -- > Jarkko > > --- > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 991ac9c..2ca0d44 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -30,6 +30,7 @@ > > #include <linux/regulator/machine.h> > #include <linux/i2c/twl4030.h> > +#include <linux/usb/otg.h> > > #include <mach/hardware.h> > #include <asm/mach-types.h> > @@ -406,6 +407,10 @@ static void __init omap3_beagle_init(void) > /* REVISIT leave DVI powered down until it's needed ... */ > gpio_direction_output(170, true); > > +#ifdef CONFIG_NOP_USB_XCEIV > + /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ > + usb_nop_xceiv_register(); > +#endif > usb_musb_init(); > omap3beagle_flash_init(); > } > diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig > index 803adcb..e27ed96 100644 > --- a/drivers/usb/musb/Kconfig > +++ b/drivers/usb/musb/Kconfig > @@ -13,6 +13,7 @@ config USB_MUSB_HDRC > select NOP_USB_XCEIV if ARCH_DAVINCI > select TWL4030_USB if MACH_OMAP_3430SDP > select NOP_USB_XCEIV if MACH_OMAP3EVM > + select NOP_USB_XCEIV if MACH_OMAP3_BEAGLE Shouldn't we be selecting TWL4030_USB if MACH_OMAP3_BEAGLE. The beagleboard does use the PHY in the TWL4030, and not a transparent PHY. - Anand -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
