* Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [090813 12:26]:
> On Wed, Aug 12, 2009 at 03:18:49PM +0300, Tony Lindgren wrote:
> > + if (mmc_controller->slots[0].wires == 8)
> > + printk(KERN_WARNING
> > + "\n MMC2: DAT4, DAT5, DAT6, DAT7: "
> > + "Setup the mux in board file");
> > + }
> > + if (controller_nr == 2) {
> > + /* MMC3 */
> > + printk(KERN_WARNING
> > + "\n MMC3: Setup the mux in board file: "
> > + "Multiple options exist, so is board specific");
> > + }
>
> Having printks which issue a level, followed by a newline, message and
> omitting the newline at the end looks really wrong:
>
> - firstly, the KERN_WARNING "\n" line creates a blank line in the kernel
> message log.
> - the message itself will be at the kernels default message level
> - the following kernel message will be appended to the end, with any
> level tag exposed.
>
> So I think the above printk statements are completely wrong and broken.
I've updated the patch to change the printk statements to just comments.
Regards,
Tony
>From fc3866a4da5cfcc7090809367997b2f4fce6a382 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@xxxxxx>
Date: Sun, 16 Aug 2009 18:17:06 +0300
Subject: [PATCH] OMAP3: MMC: Add mux for pins
For OMAP3 add MMC1 MMC2 pin mux MMC3 mux is not added as there are
multiple configurations possible, so the muxing is left to be done
in board file.
Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx>
Signed-off-by: Chikkature Rajashekar <madhu.cr@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 894cc35..a2e9156 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -513,6 +513,47 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
+
+ if (cpu_is_omap3430()) {
+ if (controller_nr == 0) {
+ omap_cfg_reg(N28_3430_MMC1_CLK);
+ omap_cfg_reg(M27_3430_MMC1_CMD);
+ omap_cfg_reg(N27_3430_MMC1_DAT0);
+ if (mmc_controller->slots[0].wires == 4 ||
+ mmc_controller->slots[0].wires == 8) {
+ omap_cfg_reg(N26_3430_MMC1_DAT1);
+ omap_cfg_reg(N25_3430_MMC1_DAT2);
+ omap_cfg_reg(P28_3430_MMC1_DAT3);
+ }
+ if (mmc_controller->slots[0].wires == 8) {
+ omap_cfg_reg(P27_3430_MMC1_DAT4);
+ omap_cfg_reg(P26_3430_MMC1_DAT5);
+ omap_cfg_reg(R27_3430_MMC1_DAT6);
+ omap_cfg_reg(R25_3430_MMC1_DAT7);
+ }
+ }
+ if (controller_nr == 1) {
+ /* MMC2 */
+ omap_cfg_reg(AE2_3430_MMC2_CLK);
+ omap_cfg_reg(AG5_3430_MMC2_CMD);
+ omap_cfg_reg(AH5_3430_MMC2_DAT0);
+
+ /*
+ * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
+ * in the board-*.c files
+ */
+ if (mmc_controller->slots[0].wires == 4 ||
+ mmc_controller->slots[0].wires == 8) {
+ omap_cfg_reg(AH4_3430_MMC2_DAT1);
+ omap_cfg_reg(AG4_3430_MMC2_DAT2);
+ omap_cfg_reg(AF4_3430_MMC2_DAT3);
+ }
+ }
+
+ /*
+ * For MMC3 the pins need to be muxed in the board-*.c files
+ */
+ }
}
void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 026c4fc..d49b9a7 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,6 +486,55 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+/* MMC1 */
+MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC2 */
+MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC3 */
+MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 85a6217..d24fdf9 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -853,6 +853,34 @@ enum omap34xx_index {
AE5_34XX_GPIO143,
H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
+
+ /* MMC1 */
+ N28_3430_MMC1_CLK,
+ M27_3430_MMC1_CMD,
+ N27_3430_MMC1_DAT0,
+ N26_3430_MMC1_DAT1,
+ N25_3430_MMC1_DAT2,
+ P28_3430_MMC1_DAT3,
+ P27_3430_MMC1_DAT4,
+ P26_3430_MMC1_DAT5,
+ R27_3430_MMC1_DAT6,
+ R25_3430_MMC1_DAT7,
+
+ /* MMC2 */
+ AE2_3430_MMC2_CLK,
+ AG5_3430_MMC2_CMD,
+ AH5_3430_MMC2_DAT0,
+ AH4_3430_MMC2_DAT1,
+ AG4_3430_MMC2_DAT2,
+ AF4_3430_MMC2_DAT3,
+
+ /* MMC3 */
+ AF10_3430_MMC3_CLK,
+ AC3_3430_MMC3_CMD,
+ AE11_3430_MMC3_DAT0,
+ AH9_3430_MMC3_DAT1,
+ AF13_3430_MMC3_DAT2,
+ AF13_3430_MMC3_DAT3,
};
struct omap_mux_cfg {
