Tony Lindgren <tony <at> atomide.com> writes: <snip> > I don't have a Beagle, so somebody please check this defconfig and enable > PM and OTG if possible. > > Tony > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo <at> vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Hi, I checked this defconfig at it's commit 5dc8c8ffb27d93533d71493ca4a419f0290a3b2f with the following: 1. Brought omap3_beagle_defconfig forward to 2.6.31-rc5 level. (via make gconfig) 2. Enabled CONFIG_PM, CONFIG_USB_MUSB_OTG, and CONFIG_USB_GADGET_MUSB_HDRC with associated default subchoices. (via make gconfig) 3. Removed 1 line work in progress? from arch/arm/mach-omap2/serial.c 4. Added previously posted (but not committed) patch for drivers/usb/otg/twl4030-usb.c I was able to boot through INIT. The diffs are against the 2.6.31-rc5 generated version of omap3_beagle_defconfig. Hope this helps. diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index 59eaf8c..3c001e5 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5 -# Sat Aug 15 19:12:37 2009 +# Sat Aug 15 20:05:10 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -136,7 +136,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # System Type @@ -338,7 +338,12 @@ CONFIG_BINFMT_MISC=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -829,7 +834,8 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y @@ -853,10 +859,10 @@ CONFIG_USB_MUSB_SOC=y # # OMAP 343x high speed USB support # -CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_PERIPHERAL is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_INVENTRA_DMA=y @@ -931,8 +937,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set # CONFIG_USB_GADGET_S3C2410 is not set -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set # CONFIG_USB_GADGET_CI13XXX is not set diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3f29376..bd9e2b2 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -429,7 +429,6 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) omap_ctrl_writew(v, uart->padconf); } - p->irqflags |= IRQF_SHARED; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); WARN_ON(ret); diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 9e3e7a5..d1852d4 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -774,7 +774,7 @@ static int __init twl4030_usb_init(void) { return platform_driver_register(&twl4030_usb_driver); } -subsys_initcall(twl4030_usb_init); +subsys_initcall_sync(twl4030_usb_init); static void __exit twl4030_usb_exit(void) { -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
