Re: [PATCH 10/10] OMAP3: update OMAP3 Beagle defconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Aug 12, 2009 at 02:24:15PM +0200, ext Tony Lindgren wrote:
> From: Paul Walmsley <paul@xxxxxxxxx>
> 
> Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support.
> Beagle can again use MMC rootfs after this patch.  Tested on BeagleBoard
> rev C2.
> 
> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
> Cc: Jason Kridner <jkridner@xxxxxxxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>  arch/arm/configs/omap3_beagle_defconfig |   11 +++++++++--
>  1 files changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
> index 4c6fb7e..264ac2e 100644
> --- a/arch/arm/configs/omap3_beagle_defconfig
> +++ b/arch/arm/configs/omap3_beagle_defconfig
> @@ -236,6 +236,7 @@ CONFIG_ARM_THUMB=y
>  # CONFIG_CPU_BPREDICT_DISABLE is not set
>  CONFIG_HAS_TLS_REG=y
>  # CONFIG_OUTER_CACHE is not set
> +CONFIG_COMMON_CLKDEV=y
>  
>  #
>  # Bus support
> @@ -713,6 +714,7 @@ CONFIG_GPIOLIB=y
>  # CONFIG_GPIO_MAX732X is not set
>  # CONFIG_GPIO_PCA953X is not set
>  # CONFIG_GPIO_PCF857X is not set
> +CONFIG_GPIO_TWL4030=y
>  
>  #
>  # PCI GPIO expanders:
> @@ -741,6 +743,7 @@ CONFIG_SSB_POSSIBLE=y
>  # CONFIG_MFD_SM501 is not set
>  # CONFIG_HTC_EGPIO is not set
>  # CONFIG_HTC_PASIC3 is not set
> +CONFIG_TWL4030_CORE=y
>  # CONFIG_UCB1400_CORE is not set
>  # CONFIG_MFD_TMIO is not set
>  # CONFIG_MFD_T7L66XB is not set
> @@ -787,7 +790,7 @@ CONFIG_DUMMY_CONSOLE=y
>  CONFIG_USB_SUPPORT=y
>  CONFIG_USB_ARCH_HAS_HCD=y
>  CONFIG_USB_ARCH_HAS_OHCI=y
> -# CONFIG_USB_ARCH_HAS_EHCI is not set
> +CONFIG_USB_ARCH_HAS_EHCI=y
>  CONFIG_USB=y
>  # CONFIG_USB_DEBUG is not set
>  # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
> @@ -806,6 +809,8 @@ CONFIG_USB_MON=y
>  #
>  # USB Host Controller Drivers
>  #
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_ROOT_HUB_TT=y
>  # CONFIG_USB_C67X00_HCD is not set
>  # CONFIG_USB_ISP116X_HCD is not set
>  # CONFIG_USB_ISP1760_HCD is not set
> @@ -923,6 +928,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
>  #
>  # CONFIG_MMC_SDHCI is not set
>  # CONFIG_MMC_OMAP is not set
> +CONFIG_MMC_OMAP_HS=y
>  # CONFIG_MEMSTICK is not set
>  # CONFIG_ACCESSIBILITY is not set
>  # CONFIG_NEW_LEDS is not set
> @@ -981,10 +987,11 @@ CONFIG_RTC_INTF_DEV=y
>  #
>  # Voltage and Current regulators
>  #
> -# CONFIG_REGULATOR is not set
> +CONFIG_REGULATOR=y
>  # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
>  # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
>  # CONFIG_REGULATOR_BQ24022 is not set
> +CONFIG_REGULATOR_TWL4030=y
>  # CONFIG_UIO is not set

musb will still fail here if we don't have twl4030-usb enabled.

could you updated the patch to add that as well ??

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux