From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
OMAP4 has a single McASP instance with single serializer and locked for DIT
mode.
To be able to enable the support the following fixes needed:
- Add the DAT port ranges to the target module's ranges
- SIDLE mode must be disabled as it is not working with McASP
most likely module integration issue with McASP
We can already fill in the op-mode and serial-dir for McASP as it only
supports this configuration, but keep the module disabled as there is no
known device available where it is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
---
arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
index 7ae8b620515c5..a8d66240d17d5 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-l4-abe.dtsi
@@ -192,8 +192,7 @@ target-module@28000 { /* 0x40128000, ap 8 08.0 */
<0x28004 0x4>;
reg-names = "rev", "sysc";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
+ <SYSC_IDLE_NO>;
/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
clock-names = "fck";
--
2.42.0
