* Pandita, Vikram <vikram.pandita@xxxxxx> [090810 23:20]: > > > >-----Original Message----- > >From: Tony Lindgren [mailto:tony@xxxxxxxxxxx] > >Sent: Monday, August 10, 2009 11:39 AM > >To: Pandita, Vikram > >Cc: linux-omap@xxxxxxxxxxxxxxx > >Subject: Re: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver > > > >* Vikram Pandita <vikram.pandita@xxxxxx> [090623 02:29]: > >> Pass irqflags to 8250 driver from zoom2 board file > >> Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq > >> > >> This patch is dependent on 8250 driver changes getting accepted upstream: > >> Refer: http://patchwork.kernel.org/patch/31884/ > > > >FYI, I'll archive this for now, please resubmit once the related changes > >are integrated. Or if resubmitting the related changes, please submit this > >too via the serial list. > > Looks like the dependency patch is already in linux-next tree at [1]. > The dependency patch is already lined up stream. > > So looks like you can line this irqflag change for zoom2. OK, thanks, will queue to omap3-upstream queue. Tony > > [1] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7 > > > > >Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> > > > > > >> Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx> > >> --- > >> > >> Warning: > >> could cause compilation break if 8250 patch is not integrated first > >> > >> arch/arm/mach-omap2/board-zoom-debugboard.c | 2 ++ > >> arch/arm/mach-omap2/serial.c | 2 +- > >> 2 files changed, 3 insertions(+), 1 deletions(-) > >> > >> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom- > >debugboard.c > >> index bac5c43..f546063 100644 > >> --- a/arch/arm/mach-omap2/board-zoom-debugboard.c > >> +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c > >> @@ -12,6 +12,7 @@ > >> #include <linux/gpio.h> > >> #include <linux/serial_8250.h> > >> #include <linux/smsc911x.h> > >> +#include <linux/interrupt.h> > >> > >> #include <mach/gpmc.h> > >> > >> @@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > >> .mapbase = 0x10000000, > >> .irq = OMAP_GPIO_IRQ(102), > >> .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, > >> + .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, > >> .iotype = UPIO_MEM, > >> .regshift = 1, > >> .uartclk = QUART_CLK, > >> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c > >> index b094c15..45d4884 100644 > >> --- a/arch/arm/mach-omap2/serial.c > >> +++ b/arch/arm/mach-omap2/serial.c > >> @@ -429,7 +429,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) > >> omap_ctrl_writew(v, uart->padconf); > >> } > >> > >> - p->flags |= UPF_SHARE_IRQ; > >> + p->irqflags |= IRQF_SHARED; > >> ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, > >> "serial idle", (void *)uart); > >> WARN_ON(ret); > >> -- > >> 1.6.0.3.613.g9f8f13 > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in > >> the body of a message to majordomo@xxxxxxxxxxxxxxx > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
