I was working on moving Debian's root from internal mmc (because it still doesn't work with linux-omap) to external mmc, running standard Maemo and connected by USB to the MMC cards (with the cards mounted), when suddenly the N810 reset. I have no idea why, but now external MMC does not work. I have been using this card for a while and have not had any problems with it; it surely can also be considered still nearly 'new'. I reflashed Maemo with the latest RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM (and checked md5sum) and now I get the following from dmesg with either an open or close of the external MMC slot. [ 2292.843750] menelaus 1-0072: Setting voltage 'VMMC' to 3100 mV (reg 0x0a, val 0xf8) [ 2292.953125] menelaus 1-0072: Setting voltage 'VMMC' to 3000 mV (reg 0x0a, val 0xb8) [ 2295.320312] menelaus 1-0072: Shutting off 'VMMC' No device ever shows up in /dev, only mmcblk0 (the internal MMC). When I connect by USB to the MMC cards, I see in the logs on my Debian system: kernel: scsi 43:0:0:0: Direct-Access Nokia N810 031 PQ: 0 ANSI: 2 kernel: scsi 43:0:0:1: Direct-Access Nokia N810 031 PQ: 0 ANSI: 2 kernel: sd 43:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB) kernel: sd 43:0:0:0: [sdb] Write Protect is off kernel: sd 43:0:0:0: [sdb] Mode Sense: 0f 00 00 00 kernel: sd 43:0:0:0: [sdb] Assuming drive cache: write through kernel: sd 43:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB) kernel: sd 43:0:0:0: [sdb] Write Protect is off kernel: sd 43:0:0:0: [sdb] Mode Sense: 0f 00 00 00 kernel: sd 43:0:0:0: [sdb] Assuming drive cache: write through kernel: sdb: sdb1 kernel: sd 43:0:0:0: [sdb] Attached SCSI removable disk kernel: sd 43:0:0:0: Attached scsi generic sg1 type 0 kernel: sd 43:0:0:1: [sdc] Attached SCSI removable disk kernel: sd 43:0:0:1: Attached scsi generic sg2 type 0 No information about the external MMC. Thanks for any hints.
Attachment:
signature.asc
Description: Digital signature
