* Andreas Kemnade <andreas@xxxxxxxxxxxx> [210605 14:21]: > On Sat, 5 Jun 2021 08:18:14 +0300 > Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > > * Andreas Kemnade <andreas@xxxxxxxxxxxx> [210604 17:00]: > > > On Fri, 4 Jun 2021 12:39:54 +0300 > > > Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > > > Does the following patch fix things for you or does something else break again? :) > > > > > > > sigh,.. > > > ok, it breaks something. gadget (at least ecm) only works if > > > musb/phy stuff is loaded, ecm configured via configfs > > > rmmod omap2430 > > > modprube 2430 > > > > > > until the next usb disconnect > > > and another rmmod/modprobe is required. > > > > Hmm I don't follow, do you mean there's now another issue after a > > system suspend? Or is this issue not related to system suspend and > > resume? > > > independently of suspend. OK > > > The following musb patches were applied additional to that one you > > > added to this mail on top of 5.13-rc4. > > > > > > usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling > > > usb: musb: Add missing PM suspend and resume functions for 2430 glue > > > usb: musb: Check devctl status again for a spurious session request > > > > Does one of the above cause some additional usb gadget issue? > > > I do not see any additional gadget issue just with them. It just starts > with the small patch you proposed to fix suspend power consumption in > this thread. Oh OK, so some more mystery hardware debugging still left to do then. Regards, Tony
