Hi On 6/2/21 8:30 AM, Tony Lindgren wrote: > Sounds like the beagleboard timer errata handling is either picking > a wrong clockevent timer, or later on ti-sysc misdetects the active > timer for clockevent and idles it. > > What does dmesg say in the beginning for clockevent and clocksource > timers? > I attached logs from commit 6cfcd5563b4f and commit 30c66fc30ee7 before it. Perhaps this is relevant difference between them? +ti-sysc: probe of 49032000.target-module failed with error -16 +ti-sysc: probe of 48304000.target-module failed with error -16 Jarkko
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.8.0-rc4-00002-g6cfcd5563b4f (jarkko@mylly64) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #10 SMP Wed Jun 2 21:00:02 EEST 2021 [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI OMAP3 BeagleBoard [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000008fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000008fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp) [ 0.000000] percpu: Embedded 19 pages/cpu s49036 r8192 d20596 u77824 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64452 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 226444K/260096K available (9216K kernel code, 797K rwdata, 2152K rodata, 1024K init, 255K bss, 17268K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 4.0) with 96 interrupts [ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x530 with crng_init=0 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] TI gptimer clockevent: 13000000 Hz at /ocp@68000000/target-module@49032000 [ 0.000000] TI gptimer clocksource: always-on /ocp@68000000/target-module@48304000 [ 0.000091] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000183] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.001525] Console: colour dummy device 80x30 [ 0.001647] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.001708] This ensures that you still see kernel messages. Please [ 0.001770] update your kernel commandline. [ 0.001953] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.054626] pid_max: default: 32768 minimum: 301 [ 0.055023] LSM: Security Framework initializing [ 0.055267] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.055358] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.057281] CPU: Testing write buffer coherency: ok [ 0.057464] CPU0: Spectre v2: using BPIALL workaround [ 0.058654] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.064666] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.066162] rcu: Hierarchical SRCU implementation. [ 0.069458] smp: Bringing up secondary CPUs ... [ 0.069549] smp: Brought up 1 node, 1 CPU [ 0.069641] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.069702] CPU: All CPU(s) started in SVC mode. [ 0.071624] devtmpfs: initialized [ 0.105041] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.105712] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.105804] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.107757] pinctrl core: initialized pinctrl subsystem [ 0.109191] thermal_sys: Registered thermal governor 'fair_share' [ 0.109252] thermal_sys: Registered thermal governor 'step_wise' [ 0.109344] thermal_sys: Registered thermal governor 'user_space' [ 0.111968] NET: Registered protocol family 16 [ 0.118377] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.150360] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.151367] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.246368] audit: initializing netlink subsys (disabled) [ 0.249053] cpuidle: using governor menu [ 0.249786] Reprogramming SDRC clock to 332000000 Hz [ 0.290405] audit: type=2000 audit(0.220:1): state=initialized audit_enabled=0 res=1 [ 0.291351] OMAP GPIO hardware version 2.5 [ 0.351928] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.352020] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.388153] No ATAGs? [ 0.388244] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.442230] iommu: Default domain type: Translated [ 0.444854] omap-iommu 480bd400.mmu: 480bd400.mmu registered [ 0.445770] platform 480bc000.isp: Adding to iommu group 0 [ 0.449493] vgaarb: loaded [ 0.450500] SCSI subsystem initialized [ 0.457000] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz [ 0.459381] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.461517] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz [ 0.462158] pps_core: LinuxPPS API ver. 1 registered [ 0.462249] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.462371] PTP clock support registered [ 0.465515] clocksource: Switched to clocksource dmtimer [ 1.654876] VFS: Disk quotas dquot_6.6.0 [ 1.655120] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.691223] NET: Registered protocol family 2 [ 1.692687] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.692810] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.692932] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.693054] TCP: Hash tables configured (established 2048 bind 2048) [ 1.693359] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.693481] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.693878] NET: Registered protocol family 1 [ 1.698577] RPC: Registered named UNIX socket transport module. [ 1.698669] RPC: Registered udp transport module. [ 1.698730] RPC: Registered tcp transport module. [ 1.698791] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.698883] PCI: CLS 0 bytes, default 64 [ 1.709625] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.712463] Initialise system trusted keyrings [ 1.713775] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.718200] NFS: Registering the id_resolver key type [ 1.718322] Key type id_resolver registered [ 1.718414] Key type id_legacy registered [ 1.718566] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.719268] Key type asymmetric registered [ 1.719360] Asymmetric key parser 'x509' registered [ 1.719482] io scheduler mq-deadline registered [ 1.719573] io scheduler kyber registered [ 1.738952] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 1.743774] ti-sysc: probe of 49032000.target-module failed with error -16 [ 1.744171] ti-sysc: probe of 48304000.target-module failed with error -16 [ 1.744659] ti-sysc 480cb024.target-module: sysc_flags 00000100 != 00000110 [ 1.746887] ti-sysc 480c9024.target-module: sysc_flags 00000100 != 00000110 [ 1.751800] pinctrl-single 48002030.pinmux: 284 pins, size 568 [ 1.752655] pinctrl-single 48002a00.pinmux: 46 pins, size 92 [ 1.753814] pinctrl-single 480025d8.pinmux: 18 pins, size 36 [ 1.762878] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 1.772247] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a 8250 [ 1.776336] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250 [ 1.780151] 49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250 [ 2.637878] random: fast init done [ 2.661865] printk: console [ttyS2] enabled [ 2.696990] brd: module loaded [ 2.721343] loop: module loaded [ 2.728332] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.755157] twl 0-0048: PIH (irq 23) chaining IRQs 147..155 [ 2.761993] twl 0-0048: power (irq 152) chaining IRQs 155..162 [ 2.848632] twl4030_gpio twl4030-gpio: gpio (irq 147) chaining IRQs 163..180 [ 2.881195] TWL4030: HFCLK is not configured [ 2.886444] twl4030-audio 48070000.i2c:twl@48:audio: Invalid audio_mclk [ 2.893951] twl4030-audio: probe of 48070000.i2c:twl@48:audio failed with error -22 [ 2.904541] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.914245] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xba [ 2.921813] nand: Micron MT29F2G16ABD [ 2.926300] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.934814] omap2-nand 30000000.nand: nand: using OMAP_ECC_HAM1_CODE_HW [ 2.942687] 5 fixed-partitions partitions found on MTD device omap2-nand.0 [ 2.950775] Creating 5 MTD partitions on "omap2-nand.0": [ 2.957092] 0x000000000000-0x000000080000 : "X-Loader" [ 2.968231] 0x000000080000-0x000000260000 : "U-Boot" [ 2.979644] 0x000000260000-0x000000280000 : "U-Boot Env" [ 2.990570] 0x000000280000-0x000000680000 : "Kernel" [ 3.002990] 0x000000680000-0x000010000000 : "Filesystem" [ 3.162048] libphy: Fixed MDIO Bus: probed [ 3.171356] i2c /dev entries driver [ 3.182037] sdhci: Secure Digital Host Controller Interface driver [ 3.189422] sdhci: Copyright(c) Pierre Ossman [ 3.243255] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.253173] ledtrig-cpu: registered to indicate activity on CPUs [ 3.267730] drop_monitor: Initializing network drop monitor service [ 3.275268] Initializing XFRM netlink socket [ 3.280853] NET: Registered protocol family 10 [ 3.291046] Segment Routing with IPv6 [ 3.295837] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.303802] NET: Registered protocol family 17 [ 3.309295] NET: Registered protocol family 15 [ 3.314514] Key type dns_resolver registered [ 3.320587] oprofile: using arm/armv7 [ 3.325439] ThumbEE CPU extension supported. [ 3.330291] Registering SWP/SWPB emulation handler [ 3.336883] PM: no software I/O chain control; some wakeups may be lost [ 3.346649] SmartReflex Class3 initialized [ 3.352752] Loading compiled-in X.509 certificates [ 3.434600] smartreflex 480cb000.smartreflex: omap_sr_probe: SmartReflex driver initialized [ 3.445129] smartreflex 480cb000.smartreflex: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values [ 3.462768] smartreflex: probe of 480cb000.smartreflex failed with error -61 [ 3.471862] smartreflex 480c9000.smartreflex: omap_sr_probe: SmartReflex driver initialized [ 3.481842] smartreflex 480c9000.smartreflex: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values [ 3.499664] smartreflex: probe of 480c9000.smartreflex failed with error -61 [ 3.512908] Waiting for root device /dev/mmcblk0p2...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.8.0-rc4-00001-g30c66fc30ee7 (jarkko@mylly64) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #12 SMP Wed Jun 2 21:08:19 EEST 2021 [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI OMAP3 BeagleBoard [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x8e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000008fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000008fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp) [ 0.000000] percpu: Embedded 19 pages/cpu s49036 r8192 d20596 u77824 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64452 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 226444K/260096K available (9216K kernel code, 797K rwdata, 2152K rodata, 1024K init, 255K bss, 17268K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 4.0) with 96 interrupts [ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x530 with crng_init=0 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] TI gptimer clockevent: 13000000 Hz at /ocp@68000000/target-module@49032000 [ 0.000000] TI gptimer clocksource: always-on /ocp@68000000/target-module@48304000 [ 0.000091] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.000183] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.001525] Console: colour dummy device 80x30 [ 0.001647] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.001708] This ensures that you still see kernel messages. Please [ 0.001770] update your kernel commandline. [ 0.001953] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.054656] pid_max: default: 32768 minimum: 301 [ 0.055053] LSM: Security Framework initializing [ 0.055297] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.055389] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.057281] CPU: Testing write buffer coherency: ok [ 0.057464] CPU0: Spectre v2: using BPIALL workaround [ 0.058654] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.064544] Setting up static identity map for 0x80100000 - 0x80100078 [ 0.066101] rcu: Hierarchical SRCU implementation. [ 0.069366] smp: Bringing up secondary CPUs ... [ 0.069458] smp: Brought up 1 node, 1 CPU [ 0.069549] SMP: Total of 1 processors activated (594.73 BogoMIPS). [ 0.069610] CPU: All CPU(s) started in SVC mode. [ 0.071594] devtmpfs: initialized [ 0.105529] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.106201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.106292] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.108245] pinctrl core: initialized pinctrl subsystem [ 0.109680] thermal_sys: Registered thermal governor 'fair_share' [ 0.110076] thermal_sys: Registered thermal governor 'step_wise' [ 0.110168] thermal_sys: Registered thermal governor 'user_space' [ 0.112487] NET: Registered protocol family 16 [ 0.118896] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.151947] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.152984] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.235626] audit: initializing netlink subsys (disabled) [ 0.238311] cpuidle: using governor menu [ 0.239044] Reprogramming SDRC clock to 332000000 Hz [ 0.279876] audit: type=2000 audit(0.210:1): state=initialized audit_enabled=0 res=1 [ 0.280822] OMAP GPIO hardware version 2.5 [ 0.342285] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.342559] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.379150] No ATAGs? [ 0.379241] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.433898] iommu: Default domain type: Translated [ 0.436065] omap-iommu 480bd400.mmu: 480bd400.mmu registered [ 0.436981] platform 480bc000.isp: Adding to iommu group 0 [ 0.440704] vgaarb: loaded [ 0.441711] SCSI subsystem initialized [ 0.448272] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz [ 0.450561] omap_i2c 48072000.i2c: bus 1 rev3.3 at 100 kHz [ 0.452697] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz [ 0.453765] pps_core: LinuxPPS API ver. 1 registered [ 0.453857] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.453979] PTP clock support registered [ 0.456726] clocksource: Switched to clocksource dmtimer [ 1.643554] VFS: Disk quotas dquot_6.6.0 [ 1.643798] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.680175] NET: Registered protocol family 2 [ 1.681671] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.681793] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.681915] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.682037] TCP: Hash tables configured (established 2048 bind 2048) [ 1.682312] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.682434] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.682861] NET: Registered protocol family 1 [ 1.687988] RPC: Registered named UNIX socket transport module. [ 1.688079] RPC: Registered udp transport module. [ 1.688140] RPC: Registered tcp transport module. [ 1.688201] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.688293] PCI: CLS 0 bytes, default 64 [ 1.698913] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.701873] Initialise system trusted keyrings [ 1.703186] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.706878] NFS: Registering the id_resolver key type [ 1.707031] Key type id_resolver registered [ 1.707702] Key type id_legacy registered [ 1.707855] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.708831] Key type asymmetric registered [ 1.708923] Asymmetric key parser 'x509' registered [ 1.709014] io scheduler mq-deadline registered [ 1.709106] io scheduler kyber registered [ 1.728759] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 1.738159] ti-sysc 480cb024.target-module: sysc_flags 00000100 != 00000110 [ 1.739929] ti-sysc 480c9024.target-module: sysc_flags 00000100 != 00000110 [ 1.744812] pinctrl-single 48002030.pinmux: 284 pins, size 568 [ 1.745666] pinctrl-single 48002a00.pinmux: 46 pins, size 92 [ 1.746795] pinctrl-single 480025d8.pinmux: 18 pins, size 36 [ 1.756103] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 1.765441] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a 8250 [ 1.769561] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250 [ 1.773162] 49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250 [ 2.634826] printk: console [ttyS2] enabled [ 2.639862] random: fast init done [ 2.674102] brd: module loaded [ 2.699005] loop: module loaded [ 2.705474] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.733001] twl 0-0048: PIH (irq 23) chaining IRQs 147..155 [ 2.739776] twl 0-0048: power (irq 152) chaining IRQs 155..162 [ 2.826507] twl4030_gpio twl4030-gpio: gpio (irq 147) chaining IRQs 163..180 [ 2.859497] TWL4030: HFCLK is not configured [ 2.864349] twl4030-audio 48070000.i2c:twl@48:audio: Invalid audio_mclk [ 2.872222] twl4030-audio: probe of 48070000.i2c:twl@48:audio failed with error -22 [ 2.882812] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.892547] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xba [ 2.900115] nand: Micron MT29F2G16ABD [ 2.904266] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.913116] omap2-nand 30000000.nand: nand: using OMAP_ECC_HAM1_CODE_HW [ 2.920989] 5 fixed-partitions partitions found on MTD device omap2-nand.0 [ 2.929077] Creating 5 MTD partitions on "omap2-nand.0": [ 2.935089] 0x000000000000-0x000000080000 : "X-Loader" [ 2.946075] 0x000000080000-0x000000260000 : "U-Boot" [ 2.957916] 0x000000260000-0x000000280000 : "U-Boot Env" [ 2.968872] 0x000000280000-0x000000680000 : "Kernel" [ 2.981323] 0x000000680000-0x000010000000 : "Filesystem" [ 3.140808] libphy: Fixed MDIO Bus: probed [ 3.150207] i2c /dev entries driver [ 3.160614] sdhci: Secure Digital Host Controller Interface driver [ 3.168029] sdhci: Copyright(c) Pierre Ossman [ 3.221099] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.230987] ledtrig-cpu: registered to indicate activity on CPUs [ 3.246063] drop_monitor: Initializing network drop monitor service [ 3.253997] Initializing XFRM netlink socket [ 3.259613] NET: Registered protocol family 10 [ 3.270050] Segment Routing with IPv6 [ 3.274597] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.282958] NET: Registered protocol family 17 [ 3.288421] NET: Registered protocol family 15 [ 3.293640] Key type dns_resolver registered [ 3.299743] oprofile: using arm/armv7 [ 3.304199] ThumbEE CPU extension supported. [ 3.309448] Registering SWP/SWPB emulation handler [ 3.315673] PM: no software I/O chain control; some wakeups may be lost [ 3.325378] SmartReflex Class3 initialized [ 3.331848] Loading compiled-in X.509 certificates [ 3.412719] smartreflex 480cb000.smartreflex: omap_sr_probe: SmartReflex driver initialized [ 3.422912] smartreflex 480cb000.smartreflex: omap_sr_probe: smartreflex_core: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values [ 3.440551] smartreflex: probe of 480cb000.smartreflex failed with error -61 [ 3.449615] smartreflex 480c9000.smartreflex: omap_sr_probe: SmartReflex driver initialized [ 3.459503] smartreflex 480c9000.smartreflex: omap_sr_probe: smartreflex_mpu_iva: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values [ 3.477325] smartreflex: probe of 480c9000.smartreflex failed with error -61 [ 3.490325] Waiting for root device /dev/mmcblk0p2... [ 3.592498] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.609008] mmc0: new high speed SDHC card at address aaaa [ 3.618103] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 3.635253] mmcblk0: p1 p2 p3 [ 3.735076] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.744750] VFS: Mounted root (ext4 filesystem) on device 179:2.
