[PATCH v2 0/2] am335x: set pinmux registers from pins debug file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch was born from the need to change the slew rate of the LCD pins
of a custom AM335x board during EMC tests. The AM335x, as described in a
note in section 9.1 of its reference manual [1], is unable to write
pinmux registers from user space. The series now makes it possible to
write these registers from the pins debug file.

[1] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf


Changes in v2:
- Remove CONFIG_SOC_AM33XX dependency.

Dario Binacchi (2):
  pinctrl: core: configure pinmux from pins debug file
  pinctrl: single: set pinmux from pins debug file

 drivers/pinctrl/core.c           | 56 ++++++++++++++++++++++++++++++--
 drivers/pinctrl/pinctrl-single.c | 20 ++++++++++++
 include/linux/pinctrl/pinctrl.h  |  2 ++
 3 files changed, 76 insertions(+), 2 deletions(-)

-- 
2.17.1




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux