Re: Problems configuring OMAP35x ISP driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Eino-Ville Talvala wrote:
> Zach,
> 
> We've gotten a Aptina MT9P031 driver working with the latest ISP
> patchset, both with YUV and RAW data.
> I don't know what the problem might be with YUYV data - we get useful
> YUYV data without any changes to the ISP defaults.
> However, to request RAW data, that simply uses the CCDC and bypasses all
> the processing in the ISP, request the pixelformat of
> V4L2_PIX_FMT_SGRBG10.  This will give you two bytes per pixel, at least
> in our case (although we have a 12-bit sensor cut down to 10 bits), so
> be prepared to throw out every other byte.
> 
> Hope this helps,
> 
> Eino-Ville (Eddy) Talvala
> Computer Graphics Lab
> Stanford University
> 

I've been working on this same issue, using a Micron MT9T001 sensor, without
much success.  Could you share your tree and/or patches (against what?)??
This would be most helpful.

Thanks

> On 7/14/2009 9:49 AM, Zach LeRoy wrote:
>> Hello Sergio,
>>
>> I spoke with you earlier about using the ISP and omap34xxcam drivers
>> with a micron mt9d111 SOC sensor.  I have since been able to take
>> pictures, but the sensor data is not making it through the ISP
>> data-path correctly.  I know the problem is in the ISP data-path
>> because I am configuring the sensor the exact same way as I have been
>> on my working PXA system.  I am expecting 4:2:2 packed YUV data, but
>> all of the U and V data is no more than 2 bits where it should be 8. 
>> I know the ISP has a lot of capabilities, but all I want to use it for
>> is grabbing 8-bit data from my sensor and putting it in a buffer
>> untouched using the CCDC interface (and of course clocking and
>> timing).  What are the key steps to take to get this type of
>> configuration?
>>
>> Other Questions:
>>
>> Is there any processing done on YUV data in the ISP driver by default
>> that I am missing?
>> Has any one else experienced similar problems while adding new sensor
>> support?
>>
>> Any help here would be greatly appreciated.
>>
>> Thank you,
>>
>> Zach LeRoy



-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux