Hello Sergio, I spoke with you earlier about using the ISP and omap34xxcam drivers with a micron mt9d111 SOC sensor. I have since been able to take pictures, but the sensor data is not making it through the ISP data-path correctly. I know the problem is in the ISP data-path because I am configuring the sensor the exact same way as I have been on my working PXA system. I am expecting 4:2:2 packed YUV data, but all of the U and V data is no more than 2 bits where it should be 8. I know the ISP has a lot of capabilities, but all I want to use it for is grabbing 8-bit data from my sensor and putting it in a buffer untouched using the CCDC interface (and of course clocking and timing). What are the key steps to take to get this type of configuration? Other Questions: Is there any processing done on YUV data in the ISP driver by default that I am missing? Has any one else experienced similar problems while adding new sensor support? Any help here would be greatly appreciated. Thank you, Zach LeRoy -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
