Remove xt894 specific things from motorola-mapphone-common.dtsi and add them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as applicable.
Signed-off-by: Carl Philipp Klemm <carl@xxxxxxxx>
---
.../boot/dts/motorola-mapphone-common.dtsi | 141 +----------------
.../arm/boot/dts/omap4-droid-bionic-xt875.dts | 30 ++++
arch/arm/boot/dts/omap4-droid4-xt894.dts | 143 ++++++++++++++++++
3 files changed, 174 insertions(+), 140 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index 64ba1ae69c39..f63a898ab5be 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -113,32 +113,9 @@ wl12xx_vmmc: regulator-wl12xx {
enable-active-high;
};
- gpio_keys {
- compatible = "gpio-keys";
-
- volume_down {
- label = "Volume Down";
- gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
- linux,code = <KEY_VOLUMEDOWN>;
- linux,can-disable;
- /* Value above 7.95ms for no GPIO hardware debounce */
- debounce-interval = <10>;
- };
-
- slider {
- label = "Keypad Slide";
- gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
- linux,input-type = <EV_SW>;
- linux,code = <SW_KEYPAD_SLIDE>;
- linux,can-disable;
- /* Value above 7.95ms for no GPIO hardware debounce */
- debounce-interval = <10>;
- };
- };
-
soundcard {
compatible = "audio-graph-card";
- label = "Droid 4 Audio";
+ label = "Mapphone Audio";
widgets =
"Speaker", "Earpiece",
@@ -314,80 +291,6 @@ tmp105@48 {
};
};
-&keypad {
- keypad,num-rows = <8>;
- keypad,num-columns = <8>;
- linux,keymap = <
-
- /* Row 1 */
- MATRIX_KEY(0, 2, KEY_1)
- MATRIX_KEY(0, 6, KEY_2)
- MATRIX_KEY(2, 3, KEY_3)
- MATRIX_KEY(0, 7, KEY_4)
- MATRIX_KEY(0, 4, KEY_5)
- MATRIX_KEY(5, 5, KEY_6)
- MATRIX_KEY(0, 1, KEY_7)
- MATRIX_KEY(0, 5, KEY_8)
- MATRIX_KEY(0, 0, KEY_9)
- MATRIX_KEY(1, 6, KEY_0)
-
- /* Row 2 */
- MATRIX_KEY(3, 4, KEY_APOSTROPHE)
- MATRIX_KEY(7, 6, KEY_Q)
- MATRIX_KEY(7, 7, KEY_W)
- MATRIX_KEY(7, 2, KEY_E)
- MATRIX_KEY(1, 0, KEY_R)
- MATRIX_KEY(4, 4, KEY_T)
- MATRIX_KEY(1, 2, KEY_Y)
- MATRIX_KEY(6, 7, KEY_U)
- MATRIX_KEY(2, 2, KEY_I)
- MATRIX_KEY(5, 6, KEY_O)
- MATRIX_KEY(3, 7, KEY_P)
- MATRIX_KEY(6, 5, KEY_BACKSPACE)
-
- /* Row 3 */
- MATRIX_KEY(5, 4, KEY_TAB)
- MATRIX_KEY(5, 7, KEY_A)
- MATRIX_KEY(2, 7, KEY_S)
- MATRIX_KEY(7, 0, KEY_D)
- MATRIX_KEY(2, 6, KEY_F)
- MATRIX_KEY(6, 2, KEY_G)
- MATRIX_KEY(6, 6, KEY_H)
- MATRIX_KEY(1, 4, KEY_J)
- MATRIX_KEY(3, 1, KEY_K)
- MATRIX_KEY(2, 1, KEY_L)
- MATRIX_KEY(4, 6, KEY_ENTER)
-
- /* Row 4 */
- MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
- MATRIX_KEY(6, 1, KEY_Z)
- MATRIX_KEY(7, 4, KEY_X)
- MATRIX_KEY(5, 1, KEY_C)
- MATRIX_KEY(1, 7, KEY_V)
- MATRIX_KEY(2, 4, KEY_B)
- MATRIX_KEY(4, 1, KEY_N)
- MATRIX_KEY(1, 1, KEY_M)
- MATRIX_KEY(3, 5, KEY_COMMA)
- MATRIX_KEY(5, 2, KEY_DOT)
- MATRIX_KEY(6, 3, KEY_UP)
- MATRIX_KEY(7, 3, KEY_OK)
-
- /* Row 5 */
- MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
- MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
- MATRIX_KEY(6, 0, KEY_MINUS)
- MATRIX_KEY(4, 7, KEY_EQUAL)
- MATRIX_KEY(1, 5, KEY_SPACE)
- MATRIX_KEY(3, 2, KEY_SLASH)
- MATRIX_KEY(4, 3, KEY_LEFT)
- MATRIX_KEY(5, 3, KEY_DOWN)
- MATRIX_KEY(3, 3, KEY_RIGHT)
-
- /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
- MATRIX_KEY(5, 0, KEY_VOLUMEUP)
- >;
-};
-
&mmc1 {
vmmc-supply = <&vwlan2>;
bus-width = <4>;
@@ -427,34 +330,6 @@ wlcore: wlcore@2 {
};
};
-&i2c1 {
- led-controller@38 {
- compatible = "ti,lm3532";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x38>;
-
- enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
-
- ramp-up-us = <1024>;
- ramp-down-us = <8193>;
-
- backlight_led: led@0 {
- reg = <0>;
- led-sources = <2>;
- ti,led-mode = <0>;
- label = ":backlight";
- };
-
- led@1 {
- reg = <1>;
- led-sources = <1>;
- ti,led-mode = <0>;
- label = ":kbd_backlight";
- };
- };
-};
-
&i2c2 {
touchscreen@4a {
compatible = "atmel,maxtouch";
@@ -856,20 +731,6 @@ ak8975: magnetometer@c {
"0", "0", "-1";
};
-
- lis3dh: accelerometer@18 {
- compatible = "st,lis3dh-accel";
- reg = <0x18>;
-
- vdd-supply = <&vhvio>;
-
- interrupt-parent = <&gpio2>;
- interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
-
- rotation-matrix = "0", "-1", "0",
- "1", "0", "0",
- "0", "0", "1";
- };
};
&mcbsp2 {
diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
index ba5c35b7027d..49b2a8d55356 100644
--- a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
+++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
@@ -7,3 +7,33 @@ / {
model = "Motorola Droid Bionic XT875";
compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+ MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)
+ >;
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index c0d2fd92aea3..3ea4c5b9fd31 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -3,7 +3,150 @@
#include "motorola-mapphone-common.dtsi"
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ volume_down {
+ label = "Volume Down";
+ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
+ linux,code = <KEY_VOLUMEDOWN>;
+ linux,can-disable;
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ };
+
+ slider {
+ label = "Keypad Slide";
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ linux,can-disable;
+ /* Value above 7.95ms for no GPIO hardware debounce */
+ debounce-interval = <10>;
+ };
+ };
+};
+
/ {
model = "Motorola Droid 4 XT894";
compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <
+
+ /* Row 1 */
+ MATRIX_KEY(0, 2, KEY_1)
+ MATRIX_KEY(0, 6, KEY_2)
+ MATRIX_KEY(2, 3, KEY_3)
+ MATRIX_KEY(0, 7, KEY_4)
+ MATRIX_KEY(0, 4, KEY_5)
+ MATRIX_KEY(5, 5, KEY_6)
+ MATRIX_KEY(0, 1, KEY_7)
+ MATRIX_KEY(0, 5, KEY_8)
+ MATRIX_KEY(0, 0, KEY_9)
+ MATRIX_KEY(1, 6, KEY_0)
+
+ /* Row 2 */
+ MATRIX_KEY(3, 4, KEY_APOSTROPHE)
+ MATRIX_KEY(7, 6, KEY_Q)
+ MATRIX_KEY(7, 7, KEY_W)
+ MATRIX_KEY(7, 2, KEY_E)
+ MATRIX_KEY(1, 0, KEY_R)
+ MATRIX_KEY(4, 4, KEY_T)
+ MATRIX_KEY(1, 2, KEY_Y)
+ MATRIX_KEY(6, 7, KEY_U)
+ MATRIX_KEY(2, 2, KEY_I)
+ MATRIX_KEY(5, 6, KEY_O)
+ MATRIX_KEY(3, 7, KEY_P)
+ MATRIX_KEY(6, 5, KEY_BACKSPACE)
+
+ /* Row 3 */
+ MATRIX_KEY(5, 4, KEY_TAB)
+ MATRIX_KEY(5, 7, KEY_A)
+ MATRIX_KEY(2, 7, KEY_S)
+ MATRIX_KEY(7, 0, KEY_D)
+ MATRIX_KEY(2, 6, KEY_F)
+ MATRIX_KEY(6, 2, KEY_G)
+ MATRIX_KEY(6, 6, KEY_H)
+ MATRIX_KEY(1, 4, KEY_J)
+ MATRIX_KEY(3, 1, KEY_K)
+ MATRIX_KEY(2, 1, KEY_L)
+ MATRIX_KEY(4, 6, KEY_ENTER)
+
+ /* Row 4 */
+ MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */
+ MATRIX_KEY(6, 1, KEY_Z)
+ MATRIX_KEY(7, 4, KEY_X)
+ MATRIX_KEY(5, 1, KEY_C)
+ MATRIX_KEY(1, 7, KEY_V)
+ MATRIX_KEY(2, 4, KEY_B)
+ MATRIX_KEY(4, 1, KEY_N)
+ MATRIX_KEY(1, 1, KEY_M)
+ MATRIX_KEY(3, 5, KEY_COMMA)
+ MATRIX_KEY(5, 2, KEY_DOT)
+ MATRIX_KEY(6, 3, KEY_UP)
+ MATRIX_KEY(7, 3, KEY_OK)
+
+ /* Row 5 */
+ MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */
+ MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */
+ MATRIX_KEY(6, 0, KEY_MINUS)
+ MATRIX_KEY(4, 7, KEY_EQUAL)
+ MATRIX_KEY(1, 5, KEY_SPACE)
+ MATRIX_KEY(3, 2, KEY_SLASH)
+ MATRIX_KEY(4, 3, KEY_LEFT)
+ MATRIX_KEY(5, 3, KEY_DOWN)
+ MATRIX_KEY(3, 3, KEY_RIGHT)
+
+ /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
+ MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+ >;
+};
+
+&i2c1 {
+ led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
+
+ backlight_led: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = ":backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = ":kbd_backlight";
+ };
+ };
+};
+
+&i2c4 {
+ lis3dh: accelerometer@18 {
+ compatible = "st,lis3dh-accel";
+ reg = <0x18>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
+
+ rotation-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+};
--
2.28.0
--
Carl Philipp Klemm <philipp@xxxxxxxx> <carl@xxxxxxxx>
