[PATCH 00/13] Add IPU & DSP remoteprocs on OMAP4 and OMAP5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tony,

The following series contains all the necessary DT pieces to boot the
IPU and DSP remote processors on OMAP4 and OMAP5 SoCs. They are
enabled specifically on the TI OMAP4 PandaBoard and OMAP5 uEVM boards.
This is the last DT piece that now completes the support for IPUs and
DSPs on all OMAP4+ SoCs, similar patches were merged for 5.8 covering
the DRA7xx/AM57xx SoCs. Appreciate it if you can pick up the series for
5.9 if it isn't too late.

There is one issue that I have run into while testing this series on
the latest kernel. I am seeing a l3_noc error for OMAP4 DSP when it
attempts to auto-suspend or stop after it is booted. The issue is a
L4CFG read error that happens in the sysc_disable_module() function
in ti-sysc code.

I do not have any issues on my downstream 5.4 based SDK kernel. I have
root-caused this to the OMAP4 voltage controller patches you added for
5.5 kernel through your omap-for-v5.5/pm branch, specifically the
commit 4873843718f9 ("ARM: OMAP2+: Initialize voltage controller for omap4").
The VOLTCTRL register value is 0x300 before that patch, and modifying
this register either through  omap4_vc_init_pmic_signaling() or
omap4_vc_set_pmic_signaling() will trigger this. A debug print in
sysc_disable_module() also seems to help.

regards
Suman

Suman Anna (13):
  ARM: dts: omap4: Add timer_sys_ck clocks for timers
  ARM: dts: omap5: Add timer_sys_ck clocks for timers
  ARM: dts: omap4: Update the DSP node
  ARM: dts: omap4: Add IPU DT node
  ARM: dts: omap4: Add aliases for rproc nodes
  ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP
  ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU
  ARM: dts: omap5: Add DSP and IPU nodes
  ARM: dts: omap5: Add aliases for rproc nodes
  ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP
  ARM: dts: omap5-uevm: Add system timers to DSP and IPU
  ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP
  ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP

 arch/arm/boot/dts/omap4-l4-abe.dtsi       | 20 +++++++------
 arch/arm/boot/dts/omap4-l4.dtsi           | 35 ++++++++++++++---------
 arch/arm/boot/dts/omap4-panda-common.dtsi | 34 ++++++++++++++++++++++
 arch/arm/boot/dts/omap4.dtsi              | 29 ++++++++++++++++---
 arch/arm/boot/dts/omap5-l4-abe.dtsi       | 20 +++++++------
 arch/arm/boot/dts/omap5-l4.dtsi           | 35 ++++++++++++++---------
 arch/arm/boot/dts/omap5-uevm.dts          | 34 ++++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi              | 25 ++++++++++++++++
 8 files changed, 184 insertions(+), 48 deletions(-)

-- 
2.26.0




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux