From: Syed Rafiuddin <rafiuddin.syed@xxxxxx>
This patch adds UART4 support on OMAP4430 development platform.
Signed-off-by: Syed Rafiuddin <rafiuddin.syed@xxxxxx>
---
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/serial.c | 10 ++++++++++
2 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477b..7e1e721 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
};
static struct omap_uart_config sdp4430_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15..c0bea75 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -97,6 +97,16 @@ static struct plat_serial8250_port serial_platform_data[] = {
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
+#ifdef CONFIG_ARCH_OMAP4
+ .membase = IO_ADDRESS(OMAP_UART4_BASE),
+ .mapbase = OMAP_UART4_BASE,
+ .irq = 70,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
+ }, {
+#endif
.flags = 0
}
};
--
1.5.4.7
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
