On Fri, Feb 14, 2020 at 12:34:19PM -0600, Suman Anna wrote:
Hi Sasha, On 2/14/20 9:43 AM, Sasha Levin wrote:From: Suman Anna <s-anna@xxxxxx> [ Upstream commit 2f14101a1d760db72393910d481fbf7768c44530 ] Errata Title: i879: DSP MStandby requires CD_EMU in SW_WKUP Description: The DSP requires the internal emulation clock to be actively toggling in order to successfully enter a low power mode via execution of the IDLE instruction and PRCM MStandby/Idle handshake. This assumes that other prerequisites and software sequence are followed. Workaround: The emulation clock to the DSP is free-running anytime CCS is connected via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field. Implementation: This patch implements this workaround by denying the HW_AUTO mode for the EMU clockdomain during the power-up of any DSP processor and re-enabling the HW_AUTO mode during the shutdown of the last DSP processor (actually done during the enabling and disabling of the respective DSP MDMA MMUs). Reference counting has to be used to manage the independent sequencing between the multiple DSP processors. This switching is done at runtime rather than a static clockdomain flags value to meet the target power domain state for the EMU power domain during suspend. Note that the DSP MStandby behavior is not consistent across all boards prior to this fix. Please see commit 45f871eec6c0 ("ARM: OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for details. Signed-off-by: Suman Anna <s-anna@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>You can drop this from the 5.5-stable queue. Mainline doesn't yet boot the processors, so this is not needed for stable queue.
Now dropped, thank you. -- Thanks, Sasha
