Rather than simply setting force-idle mode on boot, do a reset of the
OTG module. This really ensures that any bootloader/bootstrap code
that leaves it active will not prevent future retention. After reset,
OTG module will be in force-idle, force-standby mode.
Problem reported by Mike Chan <mikechan@xxxxxxxxxx>
Tested-by: Mike Chan <mikechan@xxxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
---
I decided to drop clock stuff from this patch as the current
code is not doing it either. This simply replaces the
force-idle with a soft reset, and uses ioremap instead of
omap_write().
This will only be a temporary patch in the pm branch until
omap_hwmod is integrated and is doing the full module reset.
arch/arm/mach-omap2/usb-musb.c | 22 ++++++++++++++++++----
1 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index d85296d..3efa19c 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -26,18 +26,32 @@
#include <linux/usb/musb.h>
+#include <asm/sizes.h>
+
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/usb.h>
-#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
+#define OTG_SYSCONFIG 0x404
+#define OTG_SYSC_SOFTRESET BIT(1)
static void __init usb_musb_pm_init(void)
{
- /* Ensure force-idle mode for OTG controller */
- if (cpu_is_omap34xx())
- omap_writel(0, OTG_SYSCONFIG);
+ void __iomem *otg_base;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ otg_base = ioremap(OMAP34XX_HSUSB_OTG_BASE, SZ_4K);
+ if (WARN_ON(!otg_base))
+ return;
+
+ /* Reset OTG controller. After reset, it will be in
+ * force-idle, force-standby mode. */
+ __raw_writel(OTG_SYSC_SOFTRESET, otg_base + OTG_SYSCONFIG);
+
+ iounmap(otg_base);
}
#ifdef CONFIG_USB_MUSB_SOC
--
1.6.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
