On Mon, Feb 04, 2019 at 04:22:36PM +0200, Roger Quadros wrote:
> From: "Andrew F. Davis" <afd@xxxxxx>
>
> The Programmable Real-Time Unit Subsystem (PRUSS) contains an
> interrupt controller (INTC) that can handle various system input
> events and post interrupts back to the device-level initiators.
> The INTC can support upto 64 input events with individual control
> configuration and hardware prioritization. These events are mapped
> onto 10 interrupt signals through two levels of many-to-one mapping
> support. Different interrupt signals are routed to the individual
> PRU cores or to the host CPU.
>
> The PRUSS INTC platform driver manages this PRUSS interrupt
> controller and implements an irqchip driver to provide a Linux
> standard way for the PRU client users to enable/disable/ack/
> re-trigger a PRUSS system event. The system events to interrupt
> channels and host interrupts relies on the mapping configuration
> provided through a firmware resource table for now. This will be
> revisited and enhanced in the future for a better interface. The
> mappings will currently be programmed during the boot/shutdown
> of the PRU.
>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> .../interrupt-controller/ti,pruss-intc-irq.txt | 51 ++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt
> new file mode 100644
> index 0000000..c70221c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt
> @@ -0,0 +1,51 @@
> +PRU ICSS INTC on TI SoCs
> +========================
> +
> +Each PRUSS has a single interrupt controller instance that is common to both
> +the PRU cores. Each interrupt controller can detect 64 input events which are
> +then mapped to 10 possible output interrupts through two levels of mapping. The
> +input events can be triggered by either the PRUs and/or various other PRUSS
> +internal and external peripherals. The first 2 output interrupts are fed
> +exclusively to the internal PRU cores, with the remaining 8 connected to
> +external interrupt controllers including the MPU.
> +
> +Required Properties:
> +--------------------
> +- compatible : should be one of,
> + "ti,am3356-pruss-intc" for AM335x family of SoCs
> + "ti,am4376-pruss-intc" for AM437x family of SoCs
> + "ti,am5728-pruss-intc" for AM57xx family of SoCs
> + "ti,k2g-pruss-intc" for 66AK2G family of SoCs
> +- reg : base address and size for the PRUSS INTC sub-module
> +- reg-names : should contain the string "intc"
Not really useful with only 1 entry.
> +- interrupts : all the interrupts generated towards the main host
> + processor in the SoC. The format depends on the
> + interrupt specifier for the particular SoC's MPU
> + parent interrupt controller
> +- interrupt-names: should use one of the following names for each interrupt,
> + the name should match the corresponding host interrupt
> + number,
> + "host2", "host3", "host4", "host5", "host6",
> + "host7", "host8" or "host9"
> + NOTE: AM437x and 66AK2G SoCs do not have "host7" interrupt
> + connected to MPU
> +- interrupt-controller : mark this node as an interrupt controller
> +- #interrupt-cells : should be 1. Client users shall use the PRU System
> + event number (the interrupt source that the client
> + is interested in) as the value of the interrupts
> + property in their node
> +
> +Example:
> +--------
> + pruss_intc: intc@20000 {
interrupt-controller@20000
> + compatible = "ti,am3356-pruss-intc";
> + reg = <0x20000 0x2000>;
> + reg-names = "intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + interrupts = <20 21 22 23 24 25 26 27>;
> + interrupt-names = "host2", "host3", "host4",
> + "host5", "host6", "host7",
> + "host8", "host9";
> + };
> +
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
