Re: [PATCH v2 03/14] dt-binding: irqchip: Add pruss-intc-irq driver for PRUSS interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/4/19 8:22 AM, Roger Quadros wrote:
> From: "Andrew F. Davis" <afd@xxxxxx>
> 
> The Programmable Real-Time Unit Subsystem (PRUSS) contains an
> interrupt controller (INTC) that can handle various system input
> events and post interrupts back to the device-level initiators.
> The INTC can support upto 64 input events with individual control
> configuration and hardware prioritization. These events are mapped
> onto 10 interrupt signals through two levels of many-to-one mapping
> support. Different interrupt signals are routed to the individual
> PRU cores or to the host CPU.
> 
> The PRUSS INTC platform driver manages this PRUSS interrupt
> controller and implements an irqchip driver to provide a Linux
> standard way for the PRU client users to enable/disable/ack/
> re-trigger a PRUSS system event. The system events to interrupt
> channels and host interrupts relies on the mapping configuration
> provided through a firmware resource table for now. This will be
> revisited and enhanced in the future for a better interface. The
> mappings will currently be programmed during the boot/shutdown
> of the PRU.
> 
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
>  .../interrupt-controller/ti,pruss-intc-irq.txt     | 51 ++++++++++++++++++++++

Better to name the file just ti,pruss-intc.txt.

Also, one minor nit, %s/dt-binding/dt-bindings/ on the the patch title.

regards
Suman

>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt
> new file mode 100644
> index 0000000..c70221c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc-irq.txt
> @@ -0,0 +1,51 @@
> +PRU ICSS INTC on TI SoCs
> +========================
> +
> +Each PRUSS has a single interrupt controller instance that is common to both
> +the PRU cores. Each interrupt controller can detect 64 input events which are
> +then mapped to 10 possible output interrupts through two levels of mapping. The
> +input events can be triggered by either the PRUs and/or various other PRUSS
> +internal and external peripherals. The first 2 output interrupts are fed
> +exclusively to the internal PRU cores, with the remaining 8 connected to
> +external interrupt controllers including the MPU.
> +
> +Required Properties:
> +--------------------
> +- compatible           : should be one of,
> +                             "ti,am3356-pruss-intc" for AM335x family of SoCs
> +                             "ti,am4376-pruss-intc" for AM437x family of SoCs
> +                             "ti,am5728-pruss-intc" for AM57xx family of SoCs
> +                             "ti,k2g-pruss-intc" for 66AK2G family of SoCs
> +- reg                  : base address and size for the PRUSS INTC sub-module
> +- reg-names            : should contain the string "intc"
> +- interrupts     : all the interrupts generated towards the main host
> +                   processor in the SoC. The format depends on the
> +                   interrupt specifier for the particular SoC's MPU
> +                   parent interrupt controller
> +- interrupt-names: should use one of the following names for each interrupt,
> +                   the name should match the corresponding host interrupt
> +                   number,
> +                       "host2", "host3", "host4", "host5", "host6",
> +                       "host7", "host8" or "host9"
> +                   NOTE: AM437x and 66AK2G SoCs do not have "host7" interrupt
> +                         connected to MPU
> +- interrupt-controller : mark this node as an interrupt controller
> +- #interrupt-cells     : should be 1. Client users shall use the PRU System
> +                         event number (the interrupt source that the client
> +                         is interested in) as the value of the interrupts
> +                         property in their node
> +
> +Example:
> +--------
> +		pruss_intc: intc@20000 {
> +			compatible = "ti,am3356-pruss-intc";
> +			reg = <0x20000 0x2000>;
> +			reg-names = "intc";
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			interrupts = <20 21 22 23 24 25 26 27>;
> +			interrupt-names = "host2", "host3", "host4",
> +					  "host5", "host6", "host7",
> +					  "host8", "host9";
> +		};
> +
> 




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux