On Thu, Jan 31, 2019 at 07:06:40PM +0100, Andreas Kemnade wrote:
> The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable
> which one is mounted so use the compatibility entry for w2sg0004
> for all which will work for both.
>
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
> Changes in v3:
> - converted to a patchset
> - added vcc-supply
>
> Changes in v2:
> - some s/gps/gnss/
> - not added vcc-supply because the regulator is not modelled
> in dts at all
>
> w2sg0004 bindings are in next-20190129
>
> arch/arm/boot/dts/omap3-gta04.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> index 02d8274a2f47..4ea0f7dc37c6 100644
> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> @@ -320,6 +320,12 @@
> >;
> };
>
> + gps_pins: pinmux_gps_pins {
s/gps/gnss/ would be more consistent, but whatever.
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
> + >;
> + };
> +
> hdq_pins: hdq_pins {
> pinctrl-single,pins = <
> OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
> @@ -652,6 +658,14 @@
> &uart2 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart2_pins>;
> + gnss: gnss {
> + compatible = "wi2wi,w2sg0004";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gps_pins>;
> + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
> + lna-supply = <&vsim>;
> + vcc-supply = <&ldo_3v3>;
> + };
Reviewed-by: Johan Hovold <johan@xxxxxxxxxx>
Johan
