Re: [PATCH] Revert "spi: omap2-mcspi: Set FIFO DMA trigger level to word length"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CC: OMAP list for good measure

On 1/13/19 2:49 PM, David Lechner wrote:
This reverts commit b682cffa3ac6d9d9e16e9b413c45caee3b391fab.

That commit breaks displays using tinydrm drivers, such as ili9225.

It causes corruption in the image that is displayed (it looks like only
1/2 of the framebuffer data is sent, the other half of the display
remains blank.)

The following error appears multiple times:

     ili9225 spi1.0: EOW timed out

Eventually, the system locks up without any additional errors.

Cc: Vignesh R <vigneshr@xxxxxx>
Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---
  drivers/spi/spi-omap2-mcspi.c | 26 +++++++++++++++++++-------
  1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 2fd8881fcd65..5a3854ff2e08 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -306,7 +306,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
  	struct omap2_mcspi_cs *cs = spi->controller_state;
  	struct omap2_mcspi *mcspi;
  	unsigned int wcnt;
-	int max_fifo_depth, bytes_per_word;
+	int max_fifo_depth, fifo_depth, bytes_per_word;
  	u32 chconf, xferlevel;
mcspi = spi_master_get_devdata(master);
@@ -322,6 +322,10 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
  		else
  			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
+ fifo_depth = gcd(t->len, max_fifo_depth);
+		if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
+			goto disable_fifo;
+
  		wcnt = t->len / bytes_per_word;
  		if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
  			goto disable_fifo;
@@ -329,17 +333,16 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
  		xferlevel = wcnt << 16;
  		if (t->rx_buf != NULL) {
  			chconf |= OMAP2_MCSPI_CHCONF_FFER;
-			xferlevel |= (bytes_per_word - 1) << 8;
+			xferlevel |= (fifo_depth - 1) << 8;
  		}
-
  		if (t->tx_buf != NULL) {
  			chconf |= OMAP2_MCSPI_CHCONF_FFET;
-			xferlevel |= bytes_per_word - 1;
+			xferlevel |= fifo_depth - 1;
  		}
mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
  		mcspi_write_chconf0(spi, chconf);
-		mcspi->fifo_depth = max_fifo_depth;
+		mcspi->fifo_depth = fifo_depth;
return;
  	}
@@ -598,6 +601,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
  	struct dma_slave_config	cfg;
  	enum dma_slave_buswidth width;
  	unsigned es;
+	u32			burst;
  	void __iomem		*chstat_reg;
  	void __iomem            *irqstat_reg;
  	int			wait_res;
@@ -617,14 +621,22 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
  	}
count = xfer->len;
+	burst = 1;
+
+	if (mcspi->fifo_depth > 0) {
+		if (count > mcspi->fifo_depth)
+			burst = mcspi->fifo_depth / es;
+		else
+			burst = count / es;
+	}
memset(&cfg, 0, sizeof(cfg));
  	cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
  	cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
  	cfg.src_addr_width = width;
  	cfg.dst_addr_width = width;
-	cfg.src_maxburst = es;
-	cfg.dst_maxburst = es;
+	cfg.src_maxburst = burst;
+	cfg.dst_maxburst = burst;
rx = xfer->rx_buf;
  	tx = xfer->tx_buf;





[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux