Hi Kevin, On 21/05/18 13:11, Kevin Hilman wrote: > Hi Roger, > > I'm looking at the dra7.dtsi to try to understand the base addresses, > and I'm rather confused about the node addresses vs the reg addresses > for both dcan1 and dcan2. > > Could you clarify why the reg address and node addresses are so > different for both, and where I might find the TRM that describes > these addresses? All I could find was a datasheet that didn't give > any info about the IP or the base addresses, but I'd really like to > understand what the *real* addresses are for this. >From the TRM - http://www.ti.com/lit/pdf/sprui30 "Table 2-4. L4_WKUP Memory Map" contains DCAN1. "Table 2-6. L4_PER2 Memory Map" contains DCAN2. As they are in different domains, the addresses look different. Also in Chapter 24.10.5 DCAN Register Manual, Table 24-1120. DCAN Instance Summary, shows base addresses for both instances. > > I'm pinging you because you're the author of the original commit[1], > but feel free to pass along to anyone else who might be able to help. > > Thanks, > > Kevin -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
