The patch regulator: lp87565: Add margin while populating ramp_delay has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2d045e94f3b4da9ac116adb7a7145b46861436ac Mon Sep 17 00:00:00 2001 From: Keerthy <j-keerthy@xxxxxx> Date: Tue, 17 Apr 2018 13:48:11 +0530 Subject: [PATCH] regulator: lp87565: Add margin while populating ramp_delay The slew rate might need a +/- 15% margin as per the latest data manual: http://www.ti.com/lit/ds/snvsb22/snvsb22.pdf Hence take a conservative approach to program 85% of the original hardware slew rate so that the software accommodates the margin delay while voltage switching. Hence reduce the default ramp_delay populated in the descriptors also by 15%. Signed-off-by: Keerthy <j-keerthy@xxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/regulator/lp87565-regulator.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index cfdbe294fb6a..5a4ea996e1dc 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -95,6 +95,10 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev, rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg]; + /* Conservatively give a 15% margin */ + rdev->constraints->ramp_delay = + rdev->constraints->ramp_delay * 85 / 100; + return 0; } @@ -154,32 +158,32 @@ static const struct lp87565_regulator regulators[] = { LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops, 256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK1_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2), LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops, 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK2_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops, 256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK3_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2), LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops, 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK2_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), }; -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
