The slew rate might need a +/- 15% margin as per the latest data manual: http://www.ti.com/lit/ds/snvsb22/snvsb22.pdf Hence take a conservative approach to program 85% of the original hardware slew rate so that the software accommodates the margin delay while voltage switching. Hence reduce the default ramp_delay populated in the descriptors also by 15%. Signed-off-by: Keerthy <j-keerthy@xxxxxx> --- drivers/regulator/lp87565-regulator.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 04a76ec..9ee08d6 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -95,6 +95,10 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev, rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg]; + /* Conservatively give a 15% margin */ + rdev->constraints->ramp_delay = + rdev->constraints->ramp_delay * 85 / 100; + return 0; } @@ -154,32 +158,32 @@ static const struct lp87565_regulator regulators[] = { LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops, 256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK1_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2), LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops, 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK2_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops, 256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK3_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2), LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2), LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops, 256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET, LP87565_REG_BUCK2_CTRL_1, - LP87565_BUCK_CTRL_1_EN, 3800, + LP87565_BUCK_CTRL_1_EN, 3230, buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2), }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
