The board uses 26MHz oscillator for the twl4030 HFCLK.
This way we will not depend on the bootloader to configure the
CFG_BOOT:HFCLK_FREQ
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
Hi,
there might be other boards (all omap3 boards with twl4030?) which uses the same
setup, but I only have schematics for beagle-xm.
In order for the driver to actually use the clock the
[PATCH] mfd: twl-core: Fix clock initialization
need to be applied. W/o the twl-core patch the clock is just ignored.
Regards,
Peter
arch/arm/boot/dts/omap3-beagle-xm.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 0349fcc9dc26..d80587de0bbf 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -30,6 +30,13 @@
ethernet = ðernet;
};
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -274,6 +281,9 @@
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
