On Thu 2018-03-29 09:34:50, Tony Lindgren wrote: > * Pavel Machek <pavel@xxxxxx> [180329 16:09]: > > > Then using the n_gsm ts 27.010 uart mux, I dial: > > > > > > ./ngsm-rw 1 "AT+CFUN=1" # connect to network > > > U0001+CFUN:OK > > > ./ngsm-rw 2 "AT+CMUT=0" # unmute speaker over ch2, do this over qmi? > > > U0001+CMUT:OK > > > ./ngsm-rw 1 "ATD#123" # dial number > > > U0001D:OK > > > > > > And I do hear a voice talking over the speakerphone :) Sorry have not tested the > > > mic yet.. > > > > Hehe, ok, that's fun! I don't need +CMUT=0. It gave me error but then > > the call worked, anyway... (I'm working with ttyUSB4). > > Oh interesting. So maybe Android is doing AT+CMUT=0 for some other > modems and it's not really needed? Or you have settings preserved > from warm boot from Android? No idea. But I booted from recovery, and I had to power up modem using +CFUN... > I did not have any luck with ttyUSB4 last night. Did you dial with > ATD123; or ATD123? So is the semicolon really needed? > AT+CFUN=1 OK ATD800123456 NO CARRIER ATD800123456; OK I seem to need semicolon. And yes, I tried again after the call. Still says no carrier. Hmm. And when calling test number, the modem failed: > [ 438.236755] Somebody do a proper driver please cpcap_soc_work [ 495.496032] phy-mapphone-mdm6600 usb-phy@1: modem status: 0 off [ 499.406005] phy-mapphone-mdm6600 usb-phy@1: modem status: 0 off [ 499.407318] usb 2-1: USB disconnect, device number 2 [ 499.424926] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 499.434112] qcserial 2-1:1.0: device disconnected [ 499.443389] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [ 499.451904] qcserial 2-1:1.1: device disconnected [ 499.460968] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [ 499.469512] qcserial 2-1:1.2: device disconnected [ 499.478057] qcserial ttyUSB3: Qualcomm USB modem converter now disconnected from ttyUSB3 [ 499.486572] qcserial 2-1:1.3: device disconnected [ 499.504760] qcserial ttyUSB4: Qualcomm USB modem converter now disconnected from ttyUSB4 [ 499.513244] qcserial 2-1:1.4: device disconnected [ 499.519104] qmi_wwan 2-1:1.5 wwan0: unregister 'qmi_wwan' usb-4a064800.ohci-1, WWAN/QMI device [ 499.611511] qmi_wwan 2-1:1.6 wwan1: unregister 'qmi_wwan' usb-4a064800.ohci-1, WWAN/QMI device [ 499.676086] Somebody do a proper driver please cpcap_soc_work [ 499.688323] qmi_wwan 2-1:1.7 wwan2: unregister 'qmi_wwan' usb-4a064800.ohci-1, WWAN/QMI device [ 499.768859] qmi_wwan 2-1:1.8 wwan3: unregister 'qmi_wwan' usb-4a064800.ohci-1, WWAN/QMI device That one will be fun to debug, I'm afraid. (Or does the message at 495.496032 mean that we turned it off?) Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
